Skip to Content.
Sympa Menu

wg-multicast - Re: Multicast setup

Subject: All things related to multicast

List archive

Re: Multicast setup


Chronological Thread 
  • From: Bill Owens <>
  • To: Ramon Sierra <>
  • Cc:
  • Subject: Re: Multicast setup
  • Date: Tue, 20 Nov 2007 11:10:16 -0500

On Tue, Nov 20, 2007 at 11:53:47AM -0400, Ramon Sierra wrote:
> Hi,
>
> I'm trying to setup a multicast in the following scenario:
>
> [RouterA] <---BGP Peering---> [RouterB] <---Static Routes---> [RouterC]
>
> *All routers are Cisco
>
>
>
> I configured ip multicast-routing, MBGP and MSDP sessions between A and
> B, also "ip pim sparse-mode at interconnection interfaces. Between
> router B and C, I configured "ip pim sparse-mode" at interconnection
> interfaces", an MSDP peer was also setup. After all that, I'm not able
> to receive or send multicast to/from Router C.
>

Two things to check:
- does multicast work for hosts connected to RouterB?
- have you configured PIM on the host interface on RouterC?

Bill.



Archive powered by MHonArc 2.6.16.

Top of Page