Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] help with configuration

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] help with configuration


Chronological Thread 
  • From: Petr Šesták <>
  • To: "" <>, Szymon Trocha <>
  • Subject: Re: [perfsonar-user] help with configuration
  • Date: Wed, 7 Aug 2024 13:44:47 +0200

Hi Szymon,

[root@ps01-l ~]# pscheduler troubleshoot
Performing basic troubleshooting of ps01-l.farm.particle.cz.

ps01-l.farm.particle.cz:

Checking that host "ps01-l.farm.particle.cz" resolves... 2001:718:401:6025:1::192
Measuring MTU... 65536+
Looking for pScheduler... OK.
Fetching API level... 6
Checking clock... OK.
Exercising API... Archivers... Contexts... Tests... Tools... OK.
Fetching service status... OK.
Checking services... Ticker... Scheduler... Runner... Archiver... OK.
Checking limits... OK.
Last run scheduled... 3 seconds ago
Last run completed... 4 minutes ago
Idle test.... 9 seconds... Finished... Checking archiving... OK.

pScheduler appears to be functioning normally.
[root@ps01-l ~]# psarchive troubleshoot
OpenSearch running ...... OK
Logstash running ...... OK
OpenSearch API (Localhost) ...... OK
Logstash Endpoint (Localhost) ...... OK
OpenSearch API (HTTPS Proxy) ...... OK
Logstash Proxy Credentials ...... OK
Logstash Endpoint (HTTPS Proxy) ...... OK
Logstash->OpenSearch Credentials ...... OK
Logstash->OpenSearch Authentication ...... OK
OpenSearch Data Exists ...... FAIL

There is no data in the database. This may be expected if this is a new archive and/or you have not yet setup measurements. If you reached this point, then the basic operations of your archive seem to be functioning. A good next step would be to login to a host running measurements and do the following:
1. Run pscheduler troubleshoot to make sure pScheduler is functioning
2. Run psconfig stats pscheduler to check if pSConfig is configuring pscheduler tests
3. If the measurement host is separate from this archive host, run psarchive troubleshoot --host ARCHIVE_HOSTNAME (replace ARCHIVE_HOSTNAME with the address of this host) from the measurement host

Thank you,
Petr

Dne 07. 08. 24 v 13:25 Szymon Trocha napsal(a):
W dniu 07.08.2024 o 13:12, Petr Šesták pisze:
Hello,

I did install perfSONAR Toolkit (Automated Script) on Alma 9 without problems. We have single physical host with a two separate Network Interface Card (NIC). The first is used for latency testing and the second is used for bandwidth. PerfSONAR is registered, Firewall is OK.

Hi Petr,

Can you run these two troubleshooting commands in your host:

# pscheduler troubleshoot

# psarchive troubleshoot

Regards,

--
Szymon Trocha
Poznań Supercomputing & Networking Center
General NOC phone +48 61-858-2015 | noc.pcss.pl <http://noc.pcss.pl>
Personal desk phone +48 61-858-2022
Wysłaliśmy do Ciebie ten e-mail w odpowiedzi na Twoje zapytanie lub w związku z oferowaną usługą. Przesłanie korespondencji do Centrum Zarządzania PCSS lub zgłoszenie telefoniczne jest równoznaczne z wyrażeniem zgody na przetwarzanie danych osobowych przez Instytut Chemii Bioorganicznej Polskiej Akademii Nauk w Poznaniu adres: ul. Z. Noskowskiego 12/14, 61-704 Poznań. Szczegółowe informacje znajdują się w naszej Polityce prywatności <http://noc.pcss.pl/index.html#PolitykaPrywatnosci>. | This message has been sent as a part of communication with PSNC NOC or your service request sent to us. For more information read our Privacy Policy <http://noc.psnc.pl/index.html#PrivacyPolicy>.

Attachment: smime.p7s
Description: Elektronicky podpis S/MIME




Archive powered by MHonArc 2.6.24.

Top of Page