perfsonar-user - Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW.
Subject: perfSONAR User Q&A and Other Discussion
List archive
Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW.
Chronological Thread
- From: "David J. Chaffin" <>
- To: Minseok Jang <>, Paul Gunn <>
- Cc: "" <>
- Subject: Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW.
- Date: Wed, 1 May 2019 14:34:42 +0000
Related:
Though Paul's data show D15xx should be fine for 10Gb, has anyone tried Epyc 3xxx? Price of Xeon-D, maybe 3-4x performance. Maybe it could do 25/40/100 Gb perfsonar?
Example:
--
David Chaffin
U. of Arkansas
From: <> on behalf of Paul Gunn <>
Sent: Monday, April 29, 2019 8:28 PM
To: Minseok Jang
Cc:
Subject: Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW.
Sent: Monday, April 29, 2019 8:28 PM
To: Minseok Jang
Cc:
Subject: Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW.
Hi Minseok,
I have ~25 perfSONAR testpoints installed around New Zealand based on Supermicro 5018D-FN8T systems, or that motherboard in a different case (DC data centres). Their X10SDV-TP8F motherboard is based around a Xeon processor D-1518. And they work fine for
me.
We're running on Ubuntu 16.04, with only the testpoint packages installed on the machines.
I tried to do a simultaneous 10G test between two 10G nodes, 22 ms apart, to show you. But pscheduler was too smart for me. First one, then the other.
Running iperf3 from the command line on both hosts simultaneously, i get ~9.82 Gbits/s
pg.
Paul Gunn
Systems Administrator
Systems Administrator
Research & Education
Advanced Network New Zealand
Advanced Network New Zealand
On Tue, 9 Apr 2019 at 13:51, Minseok Jang <> wrote:
--Hi, all.
I'm planning to deploy 10~30 PS nodes in KREONET until next year. Most sites are connected with 1G, but I want to deploy 10G PS for the future. A budget for 1 PS node is under $2000 USD.
I found that Xeon-D processor contains 10GbE controller in the processor[1]. Supermicro Xeon-D solution has IPMI remote console. It is important for remote management. Its price is around $1500 at Amazon[2]. Unfortunately, I found that Xeon D-1540 gives poor performance on this video[3]. It shows 2.6Gbps on Windows 10 in the iperf test.
Is there any perfSONAR based one Xeon D-15xx or Xeon D-21xx? Is it recommendable for 10G perfSONAR? If not, could you recommend low cost one?
Best RegardsMinseok Jang
--
Minseok Jang
KREONET Center / Supercomputing DivisionKorea Institute of Science and Technology Information
Email:LinkedIn: https://www.linkedin.com/in/msjangPhone: +82-42-869-1292 / Mobile: +82-10-2630-7480
To unsubscribe from this list: https://lists.internet2.edu/sympa/signoff/perfsonar-user
- Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW., David J. Chaffin, 05/01/2019
- Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW., Brent Draney, 05/01/2019
- <Possible follow-up(s)>
- Re: [perfsonar-user] Xeon-D adequate for low cost 10G PS under $2,000 USD? If not, recommend cheapest 10G HW., Andrej Ricnik, 05/01/2019
Archive powered by MHonArc 2.6.19.