Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] Can run RTT test from CLI but not via meshconfig-agent-tasks.conf file

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] Can run RTT test from CLI but not via meshconfig-agent-tasks.conf file


Chronological Thread 
  • From: David Szydloski <>
  • To: Valentin Vidic <>
  • Cc:
  • Subject: Re: [perfsonar-user] Can run RTT test from CLI but not via meshconfig-agent-tasks.conf file
  • Date: Wed, 14 Mar 2018 09:13:23 -0500
  • Ironport-phdr: 9a23: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

Valentin,

Thanks again for suggestion though I'm still getting the same pScheduler error. Though that does get me to think about how I'm configuring the host for testing over multiple interfaces. I will dig into that some more.

Thanks for your time and your help!

David

On Wed, Mar 14, 2018 at 9:03 AM, Valentin Vidic <> wrote:
On Wed, Mar 14, 2018 at 08:52:40AM -0500, David Szydloski wrote:
> Thank you very much for your response, however the config from the Toolkit
> web it looks my setup 1) throws errors at the 'address' commands inside of
> the target sections and 2) still is throwing errors regarding running
> submitting the job to pScheduler:

Since the test worked for me it might be related to the network
configuration of the host.  For example you can try removing:

  local_interface ens3

--
Valentin Vidic
Computer Systems Engineer - Expert
Department of Computer Infrastructure and Services
Croatian Academic and Research Network - CARNET
Josipa Marohnica 5, HR-10000 Zagreb, Croatia
tel: +385 1 6661 714, fax. +385 1 6661 635
gsm: +385 91 2480 919
www.CARNet.hr



--
David Szydloski
Core Deployment Engineer
VidScale, Inc.



Archive powered by MHonArc 2.6.19.

Top of Page