Skip to Content.
Sympa Menu

perfsonar-user - Re: [perfsonar-user] perfsonar 4.0 MeshConfig problem

Subject: perfSONAR User Q&A and Other Discussion

List archive

Re: [perfsonar-user] perfsonar 4.0 MeshConfig problem


Chronological Thread 
  • From: Edward Toth <>
  • To: Antoine Delvaux <>
  • Cc:
  • Subject: Re: [perfsonar-user] perfsonar 4.0 MeshConfig problem
  • Date: Fri, 28 Apr 2017 12:38:36 +0200
  • Ironport-phdr: 9a23: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

Hi,

thanks for the quick response! I attached the .json file to this email.
The schema of the json file should be OK, because it is generated from .conf file.

Might be, that I overlooked some changes in the configuration?

Thanks,
Edward

On 2017-04-28 12:27, Antoine Delvaux wrote:
Hi Edward,

Are you able to share with us the JSON file for your mesh? We'll then be
able to have closer look.

Thanks,

Antoine.

Le 28 avr. 2017 à 08:17, Edward Toth
<>
a écrit :

Hello!

I recently updated my nodes to perfsonar 4.0, which mostly worked fine
(except for some hiccups).
The setup contains a central management node and several test nodes in full
mesh configuration. A few days after the update I saw, that the central
archive is not getting any test results. The logs for pscheduler on the test
nodes and the management node do not show anything out of the ordinary.
However I checked the meshconfig-guiagent log and saw that it is not able to
generate the configuration.

I copied the last entry (all entries look like this):

2017/04/28 09:50:44 (15151) ERROR> GUIAgent.pm:219
perfSONAR_PS::MeshConfig::GUIAgent::__configure_guis - Problem generating
maddash configuration: Problem generating maddash configuration: Couldn't find
ma for host: perfSONAR_PS::MeshConfig::Config::Address=HASH(0x4c26070) at
/usr/lib/perfsonar/bin/../lib/perfSONAR_PS/MeshConfig/Generators/MaDDash.pm line
352.


The mesh configuration has not changed in almost a year, and it worked fine
before the update and for some time after the update to perfsonar 4.0.
Searching the documentation I could not find anything either, except that the
perfsonar-meshconfig-guiagent replaces the generate_gui_configuration +
cronjob. Have I missed something?

I don't know either if this is related to the central archive not getting
results, or if this a different problem.

Thanks in advance for any help
Edward Toth

--

Technische Universität Wien http://www.tuwien.ac.at
ZID - Zentraler Informatikdienst/Kommunikation E020C
Wiedner Hauptstrasse 8-10/020, A-1040 Wien, Austria
Tel: +43 (1) 58801-420425

Attachment: mesh.json
Description: application/json




Archive powered by MHonArc 2.6.19.

Top of Page