perfsonar-user - [perfsonar-user] local_firewall setting
Subject: perfSONAR User Q&A and Other Discussion
List archive
- From: Daniel Manzo <>
- To: "" <>
- Subject: [perfsonar-user] local_firewall setting
- Date: Wed, 14 Sep 2016 13:23:13 +0000
- Accept-language: en-US
- Ironport-phdr: 9a23:/m1ahxYZIGhyokhZyiDYl9n/LSx+4OfEezUN459isYplN5qZpcy/bnLW6fgltlLVR4KTs6sC0LWG9f27EjVdqb+681k8M7V0HycfjssXmwFySOWkMmbcaMDQUiohAc5ZX0Vk9XzoeWJcGcL5ekGA6ibqtW1aSV3DMl8/PunvFJXVic2tkv2p9of7YgNUiSC7bK8oahi6sE+Z4tEbm4V5LaA40F7UuXZSU+VQ2W5yI1+PxVDx6trmr7B59CEFl/sn9sNEGYDzebY/BehUBTInPmRz4cTtpx7rRwKe62FaWWITxEkbSzPZ5Q33C8+i+hDxsfBwjXGX
|
Hi all, My current perfSONAR setup is an HP server with 8 GB of RAM and an OS of RHEL 6.8. I installed using the CentOS bundle method with perfsonar-toolkit. My perfSONAR server is behind a firewall, and I have added the “local_firewall” setting
to my regulartesting.conf file to allow for reverse throughput results. After changing the test configuration through the web interface, I noticed that the “local_firewall” setting I had manually set up in regulartesting.conf was erased. I was wondering if
there is any way to make this “local_firewall” setting default so that it remains in the regulartesting.conf file even after changing test settings on the web interface? Or will I have to manually add the “local_firewall” setting each time I use the web interface
to change test settings? Best regards, Dan Manzo |
- [perfsonar-user] local_firewall setting, Daniel Manzo, 09/14/2016
Archive powered by MHonArc 2.6.19.