Skip to Content.
Sympa Menu

perfsonar-user - [perfsonar-user] Latency data not displayed in chart after 3.5-1 upgrade

Subject: perfSONAR User Q&A and Other Discussion

List archive

[perfsonar-user] Latency data not displayed in chart after 3.5-1 upgrade


Chronological Thread 
  • From: Hyojoon Kim <>
  • To: perfsonar-user <>
  • Subject: [perfsonar-user] Latency data not displayed in chart after 3.5-1 upgrade
  • Date: Wed, 9 Mar 2016 20:25:22 +0000
  • Accept-language: en-US

Hi, 

After an upgrade to v3.5-1, the chart that shows measured data seems to have a display issue. To be more specific, the chart does not display all available ‘Latency’ data it has *when zoomed to 1 day* by mouse *click* on ‘1d’ above the chart (not by window dragging, which is below the chart).

For example, the following links show charts that display measurement data between two nodes (128.112.228.24 and 128.112.228.23). The query was made on March 9, 2016, at around *2:54 pm*.  However, when zoomed to *1 day*, the display cuts off at around 7:33 am. When zoomed to *3 day*, the data is displayed up to roughly 2:54pm. 

In other words, zooming to *1d* seems to cut off displayed latency data, even though the data *is* actually there.  Note that ‘Ping’ data is not cut off. 

Zoom: 1 day (1d)

Zoom: 3 day (3d)


* Zoomed to between 6am - 2:54pm by dragging the window with mouse, so that the difference between 1d and 3d is more obvious (i.e., 1d zoom is missing latency data)

Zoom: 1 day

Zoom: 3 day


Any help or insight would help! 

 
Thanks,
Joon



Archive powered by MHonArc 2.6.16.

Top of Page