perfSONAR User Q&A and Other Discussion

[Joseph Ghobrial <>]

Hi, thanks so much. The restart fixed it. The change was made in early 
January.

Thanks,
joseph

-- 
Joseph Ghobrial
HPC Support Supervisor
Office of Information Technology
Rice University
x5190


> On Feb 19, 2016, at 11:10, Andrew Lake 
> <>
>  wrote:
> 
> Hi,
> 
> If you are referring to the graphs, it’s automatically detected by looking 
> at ifconfig and then registered remotely in the lookup service. The graphs 
> read it remotely since they don’t assume they are on either host. You may 
> need to give it a bit of time to update. You can try re-reunning 
> "/etc/init.d/ls_registration_daemon restart” to speed up the process, it 
> still may not be immediate.
> 
>  If you are referring to the MTU reported on the right-hand side of the 
> main toolkit web page, that should be updated as soon as the local host is 
> updated with the setting I believe.
> 
> Hope that helps,
> Andy
> 
> 
> 
> On February 19, 2016 at 11:41:37 AM, 
> 
>  
> ()
>  wrote:
> 
>> Hi, anyone have a pointer to information about where the MTU information 
>> is 
>> stored for the toolkit web interface and how it can be changed/updated? 
>> I've 
>> changed the MTU on the NIC and it is not reflected correctly in the test 
>> results MTU entry. 
>> 
>> Specifically: Capacity: 10G MTU: 1500 
>> Currently, the NIC is at 8800. 
>> 
>> Thanks, 
>> Joseph