Dear Andrew,
Thanks for the reply
Manage to export data measurements via configuration files /etc/sysconfig/ndt using ODBC DSN to MySQL
Regards,
From: Andrew Lake [mailto:]
Sent: 06 October, 2015 05:19 PM
To: Sultana Shaik
Cc: Sultan Sharief;
Subject: RE: [perfsonar-user] Raspberry Node Setup!
Hmm I’ve never used that option personally and documentation seems non-existent. That also makes me a bit skeptical well-tested it is at this point. You may want to hit the and see if you get a response there if
no one else chimes in here.
On Tue, Oct 6, 2015 at 5:54 AM, Sultana Shaik <> wrote:
Dear Support,
There is option in WEB100SRV to export the test result to mysql database, any help on this regard and
what are the tables will be created?
Regards,
From: Garnizov, Ivan (RRZE) [mailto:]
Sent: 05 October, 2015 01:07 PM
To: Sultan Sharief; Daniel Doyle
Cc: Sultana Shaik; ; Brian Tierney
Subject: RE: [perfsonar-user] Raspberry Node Setup!
Hi Sultan,
Here is a reference to a previous reply:
From:
[mailto:] On Behalf Of Andrew Lake
Sent: Donnerstag, 13. August 2015 18:27
To: Ji-Sun Kim
Cc:
Subject: Re: [perfsonar-user] How to let NDT server handle multiple requests simultaneously...
Hi,
The original NDT developer just informed me that you can do this by adding the “-m” option to your ndt server command. Assuming this is on a toolkit host using the NDT RPM, you
can update the existing WEB100SRV_OPTIONS variable to include -m in the file /etc/sysconfig/ndt. Run "/etc/init.d/ndt restart” after the change and you should be able to run multiple tests.
Thanks,
Andy
Best regards,
Ivan
From: Sultan Sharief [mailto:]
Sent: Montag, 5. Oktober 2015 09:55
To: Daniel Doyle
Cc: Sultana Sharief Shaik; Garnizov, Ivan (RRZE); ; Brian Tierney
Subject: Re: [perfsonar-user] Raspberry Node Setup!
Dear Team,
If try to run the default NDT Web Tool from multiple sessions its working 1 by 1 there is no muti threading
How can i run simultaneous tests on NDT server?
On Wed, Sep 30, 2015 at 5:40 PM, Daniel Doyle <> wrote:
On Sep 30, 2015, at 8:50 AM, Brian Tierney <> wrote:
On Wed, Sep 30, 2015 at 5:08 AM, Garnizov, Ivan (RRZE) <> wrote:
Dear Sultan,
Here are some references:
How can I publish central configuration file, so that raspberry pie will read and start sending measurements to particular server?
http://docs.perfsonar.net/multi_overview.html
How to configure raspberry pie to send data to particular server?
http://docs.perfsonar.net/multi_ma_install.html
“As an alternative, you may decide to separate your measurement hosts and archive host(s).
This allows a single “centralized” archive host to store results from multiple measurement hosts. A few use cases where this may be desirable are as follows”
The centralized MA is what you are looking for it sounds like. If you're going to be deploying a lot of these, I would suggest looking into the IP based authentication since it
allows for a workflow with fewer steps when turning up these smaller devices. The username/API key approach is still perfectly fine as well, there's just another step when setting up the device.
How to manage the raspberry pie from central server?
Please clarify your expectations here! We have recently published automation configuration procedure for central management. http://docs.perfsonar.net/multi_puppet_overview.html
I have never worked with the “raspberry pie”, but I doubt you would like to apply Central configuration management on these.
The University of Hawaii uses puppet for this.
To add to this, if you have the results being sent to a MA that has the full toolkit installed on it, the results from these tests will show up in the regular test results as if
you had configured them there. The MA actually doesn't care what the src/dst was of the tests - it will show everything that it knows about. You can click and get the same graphs as usual.
Best regards,
Ivan
-----Original Message-----
From: [mailto:] On Behalf Of Sultana Sharief Shaik
Sent: Mittwoch, 30. September 2015 06:30
To: Szymon Trocha; Sultan Sharief
Cc:
Subject: RE: [perfsonar-user] Raspberry Node Setup!
Dear Trocha,
Thanks a lot for your valuable feedback
Please note that I have installed perfsonar toolkit on centos and testpoint on Rasberry pie2
How can I publish central configuration file, so that raspberry pie will read and start sending measurements to particular server?
How to configure raspberry pie to send data to particular server?
How to manage the raspberry pie from central server?
What about reporting?
Regards,
Sultan
-----Original Message-----
From: Szymon Trocha []
Sent: 29 September, 2015 03:28 PM
To: Sultan Sharief
Cc: ; Sultana Sharief Shaik
Subject: Re: [perfsonar-user] Raspberry Node Setup!
W dniu 29.09.2015 o 13:20, Sultan Sharief pisze:
> Dear Trocha,
>
> I managed to install testpoint in raspberry pie , how to setup to
> transmit data to measurement server
>
>
Do you already have a central measurement archive?
See this for MA details:
http://docs.perfsonar.net/3.5rc2/multi_ma_install.html
Regards,
--
Szymon Trocha
Poznań Supercomputing & Netw. Center ::: NETWORK OPERATION CENTER Tel. +48 618582022 :::http://noc.man.poznan.pl
________________________________
The content of this email together with any attachments, statements and opinions expressed herein contains information that is private and confidential are intended for the named addressee(s)
only. If you are not the addressee of this email you may not copy, forward, disclose or otherwise use it or any part of it in any form whatsoever. If you have received this message in error please notify by
email immediately and delete the message without making any copies.
--
GlobalNOC Software Developer
The content of this email together with any attachments, statements and opinions expressed herein
contains information that is private and confidential are intended for the named addressee(s) only. If you are not the addressee of this email you may not copy, forward, disclose or otherwise use it or any part of it in any form whatsoever. If you have received
this message in error please notify by email immediately and delete the message without making any copies.
The content of this email together with any attachments, statements and opinions expressed
herein contains information that is private and confidential are intended for the named addressee(s) only. If you are not the addressee of this email you may not copy, forward, disclose or otherwise use it or any part of it in any form whatsoever. If you have
received this message in error please notify by email immediately and delete the message without making any copies.
|
