perfSONAR User Q&A and Other Discussion

[Brian Tierney <>]

The tests will default to V6, but you should be able to do a V4 test by using the bwctl -4 flag.

Did you try that?

Sent from my tablet device

On Apr 29, 2015, at 6:58 PM, Zhi-Wei Lu <> wrote:

Hi all,

 

I have a two NIC perfSONAR node, one NIC is used for owamp, while the other was used for bw only.  Therefore, I have a very simple bwctld.conf file as follows:

 

log_location

src_node        ipv4-address:4823

#src_node [ipv6-address]:4823

peer_port       6001-6200

facility        local5

group   bwctl

nuttcp_port     5301-5600

owamp_port      5601-5900

iperf_port      5001-5300

user    bwctl

 

This works only for the ipv4 address on one interface, now I would like to make ipv6 test available.  I thought that I might be able to add a line below the ipv4, simply by adding the ipv6 address in the configuration above (with # at the moment).  If remove #

#src_node [ipv6-address]:4823

Restart bwctld, only ipv6 test is available.  How could I make both ipv4 and ipv6 tests available on the same NIC?  I would really appreciate if someone could guide me to the right direction. 

 

Thank you.

 

Zhi-Wei Lu

IET-CR-Network Operations Center

University of California, Davis

(530) 752-0155