perfsonar-user - Re: [perfsonar-user] perfsonar project
Subject: perfSONAR User Q&A and Other Discussion
List archive
- From: Brian Tierney <>
- To: Lawrence Hitchens <>
- Cc: "" <>
- Subject: Re: [perfsonar-user] perfsonar project
- Date: Fri, 6 Feb 2015 10:49:23 -0800
Hi Lawrence:
perfSONAR on ARM-based systems is not officially supported yet. We plan to add that in the next release.
The perfsonar-PS and perfSONAR-MDM projects have officially merged, and the new web sites are:
I think your questions should all be answers by reading the documentation.
Please ignore all old web sites that refer to PS or MDM.
On Fri, Feb 6, 2015 at 10:04 AM, Lawrence Hitchens <> wrote:
Good afternoon all,I am lost.. my project manager has assigned me a project out of our NOC to perform throughput, bandwidth, tracert tests...etc across different LAN and VLAN endpoints across our internal network. After doing some research, I stumbled upon perfsonar, and, at a first glance, thought this would be perfect for our use case.However, after reading some of the documentation, I think it is over-complicated and effectively killing ants with a sledgehammer. The multiple components (CA, MP, MA...etc) are vaguely documented and there are multiple ways to deploy them.Use case: I would like the MP's to be rasberry pi's bonded to interfaces directly on the switch supporting our VLANS (E.G. one on our VoIP vlan, one on our wireless..etc) How would I set up the MPs on the rasberry pis? One such similar project is documented here (http://meetings.internet2.edu/media/medialibrary/2014/10/26/20141029-Tierney-perfCube.pdf)I also noticed that much of this project allows other facilities and campuses to test your deployment. This is out of the question as we are an MSP and cannot have external internet traffic traversing the firewall at all.Finally, I have found that there are two different major frameworks; (PerfSonar-ps and PerfSonar-MDM (as well as a less popular and less documented PS-MONIs there anyone who could explain on a high level the minimal setup and configuration to sign into a terminal OR the web GUI and schedule/run tests to the designated endpoints?Any help is GREATLY APPRECIATED!-Corey
Brian Tierney, http://www.es.net/tierney
Energy Sciences Network (ESnet), Berkeley National Lab
http://fasterdata.es.net
Energy Sciences Network (ESnet), Berkeley National Lab
http://fasterdata.es.net
- [perfsonar-user] perfsonar project, Lawrence Hitchens, 02/06/2015
- RE: [perfsonar-user] perfsonar project, Morris, Scott, 02/06/2015
- Re: [perfsonar-user] perfsonar project, Brian Tierney, 02/06/2015
- Re: [perfsonar-user] perfsonar project, Alan Whinery, 02/06/2015
- Re: [perfsonar-user] perfsonar project, Gaetano Vocca, 02/06/2015
- Re: [perfsonar-user] perfsonar project, Alan Whinery, 02/06/2015
- Re: [perfsonar-user] perfsonar project, Brian Candler, 02/09/2015
Archive powered by MHonArc 2.6.16.