perfSONAR User Q&A and Other Discussion

[Jeremy Palmer <>]

Sorry, one last question on this.

Looking at sample mesh config located here:
http://docs.perfsonar.net/multi_server_config.html#generating-the-configuration

This example does not have any "measurement_archive" sections included (where the read_url and write_url configs normally live). Is the "measurement_archive" config optional in the latest version, or is this example config incomplete?

Jeremy Palmer
Senior Network Engineer
ViaWest, Inc.
Office: 720.891.1045
Fax: 303-874-5236
http://www.viawest.com

On 12/19/2014 4:34 PM, Jeremy Palmer wrote:

Thank you, exactly what I needed.
It does appear that the example.conf mesh config file included in the RPM is indeed out of date.
I was able to use the current esnet mesh config as a good example:
https://github.com/esnet/esnet-perfsonar-mesh/blob/master/conf/esnet-mesh_config.conf

Jeremy Palmer
Senior Network Engineer
ViaWest, Inc.
Office: 720.891.1045
Fax: 303-874-5236
http://www.viawest.com

On 12/19/2014 4:18 PM, Brian Tierney wrote:

I think this is what you need:

http://docs.perfsonar.net/multi_server_config.html#generating-the-configuration

The wiki might be out of date.

On Fri, Dec 19, 2014 at 3:13 PM, Jeremy Palmer <> wrote:

I have some things that are not working correctly on my mesh (traceroute and pingER tests are not working, owamp tests do work tho). Since this is broken on every single one of my mesh hosts (all running toolkit 3.4.1), I'm assuming there is something wrong with my mesh config.

Question: Where can I find a valid example mesh config file?
Per the perfSonar Mesh Config Instructions found here:
https://code.google.com/p/perfsonar-ps/wiki/MeshConfigurationInstallation
There is an example mesh config located at /opt/perfsonar_ps/mesh_config/doc/example.conf and also at:
http://perfsonar-ps.googlecode.com/git/perfSONAR_PS-MeshConfig/doc/example.conf

However the read_url and write_url values in these example files look wrong to me (they look like pre-esmond URLs) so I'm assuming (perhaps incorrectly) that these examples are out of date.

Can someone clarify if the above example mesh config files are valid or not, and if they are not, is there updated documentation somewhere on the recommended way to create a mesh config file in the correct format?

Thanks!

--
Jeremy Palmer
Senior Network Engineer
ViaWest, Inc.
Office: 720.891.1045
Fax: 303-874-5236
http://www.viawest.com

--

Brian Tierney, http://www.es.net/tierney
Energy Sciences Network (ESnet), Berkeley National Lab
http://fasterdata.es.net