perfSONAR User Q&A and Other Discussion

[Lixin Liu <>]

Hi Jason,

OK, I disable all cron jobs which might interrupt the service
and start rerunning the script:
        /etc/init.d/psb_to_esmond start
So far so good, but it will take many hours to finish. I will
let you know the result.

Thanks,

Lixin.

> -----Original Message-----
> From: Jason Zurawski 
> [mailto:]
> Sent: December-15-14 1:28 PM
> To: Lixin Liu
> Cc: 
> 
> Subject: Re: [perfsonar-user] Update to 3.4 interrupted during DB 
> migration
>
> Hey Lixin;
>
> Our usual esmond expert is away for the holidays.  I don’t think there is
> any harm in re-running the script, but do note we haven’t tried this 
> failure
> scenario ourselves.
>
> Sorry to not be very helpful;
>
> -jason
>
> On Dec 15, 2014, at 4:12 PM, Lixin Liu 
> <>
>  wrote:
>
> > Hi,
> >
> > For some unknown reason, the migration to new DB was interrupted
> > after a few hours. The log in /var/log/perfsonar/psb_to_esmond.log
> > shows:
> >
> > 2014/12/14 03:29:29 (8021) INFO> psb_to_esmond.pl:286 
> > main::convert_owamp
> -
> > Sending metadata....[START]
> > 2014/12/14 03:29:29 (8021) INFO> psb_to_esmond.pl:345 
> > main::convert_owamp
> -
> > Sending metadata....[END]
> > 2014/12/14 03:30:01 (8021) INFO> psb_to_esmond.pl:272 
> > main::convert_owamp
> -
> > Sending delay data for 1405144515.1241952063.1686456867....[START]
> > 2014/12/14 03:39:31 (8021) ERROR> psb_to_esmond.pl:185 main:: - Error
> > posting 1405144515.1241952063.1686456867500 Server closed connection
> without
> > sending any data back
> >
> > 2014/12/14 03:39:31 (8021) INFO> psb_to_esmond.pl:565
> > main::convert_traceroute - Adding data from 2014-11-14
> > 2014/12/14 03:39:31 (8021) INFO> psb_to_esmond.pl:569
> > main::convert_traceroute - Finding test specs....[START]
> > 2014/12/14 03:39:31 (8021) INFO> psb_to_esmond.pl:583
> > main::convert_traceroute - Finding test specs....[END]
> > ...........
> >
> > 2014/12/14 03:41:35 (8021) INFO> psb_to_esmond.pl:608
> > main::convert_traceroute - Sending traceroute data for
> > 3a00d5fea634d01080838bd3a7b148ff....[START]
> > 2014/12/14 03:41:36 (8021) ERROR> psb_to_esmond.pl:185 main:: - Error
> > posting 3a00d5fea634d01080838bd3a7b148ff409 CONFLICT
> > 2014/12/14 03:41:36 (8021) INFO> psb_to_esmond.pl:742
> > main::save_state_file - Saving state file....[START]
> > 2014/12/14 03:41:36 (8021) INFO> psb_to_esmond.pl:750
> > main::save_state_file - Saving state file....[END]
> >
> >
> > Should I just rerun psb_to_esmond.pl script?
> >
> > Thanks,
> >
> > Lixin