perfSONAR User Q&A and Other Discussion

["Roderick Mooi" <>]

Hi Aaron

[rmooi@perfsonar3
 ~]$ bwping -T owamp -s perfsonar1.sanren.ac.za -c
perfsonar2.sanren.ac.za
bwping: Using tool: owamp
bwping: 18 seconds until test results available

SENDER START
owping: FILE=owping.c, LINE=1598, Unable to open control connection to
[155.232.40.26]:4003.
bwctl: local tool exited before expected with status=1

SENDER END

bwctl, bwping (ping) work fine. owampd and bwctld are running on both
perfsonar1 and perfsonar2.

What do I have to do to get bwping -T owamp working?

Thanks!

Regards,

Roderick 

>>> On 2014-02-18 at 20:11, Aaron Brown 
>>> <>
>>>  wrote:
> Hi all,
> 
> A new version of BWCTL is now available. BWCTL 1.5.1 is a major
upgrade over 
> the previously released version.
> 
> Notable additions in this release:
> - Support for ping and owping (Run 'bwping -h' to see the available
options)
> - Support for traceroute and tracepath (Run 'bwtraceroute -h' to see
the 
> available options)
> - Support for iperf3, and improved support for nuttcp
> - Support for working behind a firewall for iperf3, ping, traceroute
and 
> tracepath (use the "--flip" flag when the receiver is behind the
firewall)
> - Handles NTP unsync a bit better (the daemon start, but will deny
tests 
> until NTP is synchronized)
> 
> Those who are using the perfSONAR Toolkit, or otherwise have the
Internet2 
> RPM repository enabled, can run 'yum update' to get the latest
changes. For 
> those who are installing from source or prefer to install the RPMs
manually, 
> the newest version can be downloaded from
http://software.internet2.edu/ . 
> After installation, you will need to restart bwctld to use the new
features. 
> You can do this by running “/etc/init.d/bwctld restart”.
> 
> Please let us know if you have any questions and we look forward to 
> everyone's continued feedback and support!
> 
> Thank you,
> The perfSONAR-PS Development Team
> -- 
> This message is subject to the CSIR's copyright terms and conditions,
e-mail 
> legal notice, and implemented Open Document Format (ODF) standard. 
> The full disclaimer details can be found at 
> http://www.csir.co.za/disclaimer.html.
> 
> This message has been scanned for viruses and dangerous content by 
> MailScanner, 
> and is believed to be clean.
> 
> Please consider the environment before printing this email.

-- 
This message is subject to the CSIR's copyright terms and conditions, e-mail 
legal notice, and implemented Open Document Format (ODF) standard. 
The full disclaimer details can be found at 
http://www.csir.co.za/disclaimer.html.

This message has been scanned for viruses and dangerous content by 
MailScanner, 
and is believed to be clean.

Please consider the environment before printing this email.