perfSONAR User Q&A and Other Discussion

[Jim Warner <>]

I've had problems with the configurator with the Live-CD. What I find is that when I touch the interface with the python config program, ONBOOT gets set to "no" and so, on the next boot, I need to fix it with a text editor from the console. This has happened more than once and seems repeatable.

-jim

On Thu, Apr 3, 2014 at 6:27 AM, Aaron Brown <> wrote:

Hey Jeremy,

We’ve seen a number of static network related issues with RedHat. I’m not sure why the stock installation and network configuration scripts seem to regularly produce broken static network configurations. We don’t do anything special for them.

Cheers,
Aaron

On Apr 2, 2014, at 5:17 PM, Jeremy Palmer <> wrote:

> FYI, this bug still exists in 3.3.2. I just installed a new psToolkit box using the image:
> pS-Performance_Toolkit-3.3.2-NetInstall-x86_64.iso
>
> I'm having the exact same issue as described in my email last July (below).
> Once OS was installed, I had to edit ifcfg-eth0 and change "dhcp" to "static" even though I specified static IPv4 during setup.
>
> Jeremy Palmer
> Senior Network Engineer
> ViaWest, Inc.
> Office: 720.891.1045
> Fax: 303-874-5236
> http://www.viawest.com
>
> On 8/23/2013 12:35 PM, Jeremy Palmer wrote:
>> Just ran through a clean install using the latest 3.3.1 Netinstall i386 CD image:
>> pS-Performance_Toolkit-3.3.1-NetInstall-i386.iso
>>
>> After the install was completed and the server booted into CentOS/Toolkit3.3.1,
>> there is no IP address on eth0.
>>
>> The issue appears to be the fact that the install put the following line in
>> /etc/sysconfig/network-scripts/ifcfg-eth0 even though I selected Static during
>> the install process:
>> BOOTPROTO="dhcp"
>>
>> Otherwise all the correct static IP settings appear in the ifcfg-eth0 file
>> (IPADDR, GATEWAY, DNS1, etc).
>>
>> I did notice that the network config screen is different when using the Toolkit
>> 3.3.1 image compared to the Toolkit 3.3 image. Perhaps something changed between
>> the two images?
>>
>> To fix this I edited the ifcfg-eth0 file and changed "dhcp" to "static". I then
>> did a 'service network restart' to bring it up with the static IP info.
>>
>> Jeremy Palmer
>> Senior Network Engineer
>> ViaWest, Inc.
>> Office: 720.891.1045
>> Fax: 303-874-5236
>> http://www.viawest.com
>>