perfSONAR User Q&A and Other Discussion

["Md. Amjad Hossain" <>]

Yes, I am scheduling tests using GUI on toolkit ( https://.../toolkit/admin/regular_testing/). I have also run bwctl by hand as follows,




[root@dhcp39-88 ~]# bwctl -s nrel-pt1.es.net
bwctl: Using tool: iperf
bwctl: 26 seconds until test results available

RECEIVER START
bwctl: exec_line: iperf -B kahuku.medianet.cs.kent.edu -s -f b -m -p 5548 -t 10
bwctl: start_tool: 3594146020.046475
------------------------------------------------------------
Server listening on TCP port 5548
Binding to local address kahuku.medianet.cs.kent.edu
TCP window size: 87380 Byte (default)
------------------------------------------------------------
[ 15] local 131.123.39.85 port 5548 connected with 198.129.254.162 port 5548
[ ID] Interval       Transfer     Bandwidth
[ 15]  0.0-12.4 sec  94896128 Bytes  61462940 bits/sec
[ 15] MSS size 8948 bytes (MTU 8988 bytes, unknown interface)
bwctl: stop_exec: 3594146044.332582

RECEIVER END


[root@dhcp39-88 ~]# bwctl -c nrel-pt1.es.net
bwctl: Using tool: iperf
bwctl: 26 seconds until test results available

RECEIVER START
bwctl: exec_line: /usr/bin/iperf -B 198.129.254.162 -s -f b -m -p 5001 -t 10
bwctl: start_tool: 3594146063.374125
------------------------------------------------------------
Server listening on TCP port 5001
Binding to local address 198.129.254.162
TCP window size: 87380 Byte (default)
------------------------------------------------------------
[ 15] local 198.129.254.162 port 5001 connected with 131.123.39.85 port 5001
[ ID] Interval       Transfer     Bandwidth
[ 15]  0.0-11.0 sec  92930048 Bytes  67816732 bits/sec
[ 15] MSS size 1448 bytes (MTU 1500 bytes, ethernet)
bwctl: stop_exec: 3594146087.580142

RECEIVER END




As I have mentioned one version of owmesh.conf file is after scheduling bwctl test and another one before scheduling the test.




Thanks









On Fri, Nov 22, 2013 at 4:04 PM, Andy Lake <> wrote:

Hi,

How are you configuring your tests? Are you using the regular testing GUI on the toolkit or are you doing things by hand?  Also, why are there two versions of your owmesh file?

Thanks,

Andy

On Nov 22, 2013, at 3:42 PM, Md. Amjad Hossain <> wrote:

Hi,

My perfsonar still is not running perfSONAR-BUOY Regular Testing (Throughput and One-way Latency).

 Please help me to solve the problem.

Regards

Amjad

On Wed, Nov 20, 2013 at 10:02 AM, Md. Amjad Hossain <> wrote:

Hello,

Here is the two version of my owmesh.conf file

Thanks

Amjad

On Wed, Nov 20, 2013 at 8:36 AM, Andy Lake <> wrote:

Hi,

Can you send /opt/perfsonar_ps/perfsonarbuoy_ma/etc/owmesh.conf?

Thanks,
Andy

On Nov 19, 2013, at 10:50 PM, wrote:

> HI,
>
> My perfsonar is experiencing problems in starting the perfSONAR-BUOY
> Regular Testing Throughput and One-Way Latency services.
> I tried the following, receiving errors:
>
> cd /etc/init.d/
> $> service perfsonarbuoy_bw_master start
> Conf::must_get_val(ATTR=>DataDir, TYPE=>BW, ) undefined, called
> from /opt/perfsonar_ps/perfsonarbuoy_ma/bin/bwmaster.pl:165
> Couldn't start perfSONAR-BUOY BWCTL Measurement Service
>
> $> service perfsonarbuoy_owp_master start
> Conf::must_get_val(ATTR=>DataDir, TYPE=>OWP, ) undefined, called
> from /opt/perfsonar_ps/perfsonarbuoy_ma/bin/powmaster.pl:158
> Couldn't start perfSONAR-BUOY OWAMP Measurement Service
>
> Also, sometimes Traceroute Reqular Testing is not running.
>
> Any solution please?
>
>
> - Amjad