perfSONAR User Q&A and Other Discussion

[Manuel SUBREDU <>]

 Hi (again) :) ,

 this time I have some issues with BWCTL service. Since noone provides
access to tests without authentication, I have enabled auth support but
something is not right and I don't understand why. What I have done:
*) auth_mode in /etc/bwctld.conf is set to "OAE"
*) oppd.conf (from /usr/lib/perfsonar/services/oppd/etc) has:
  - auth set to "1"
  - as_url set to
"http://homer.rediris.es:8080/perfSONAR-AS/services/AuthService";
*) bwctld setup and started with bwctld -c /etc/

I then used perfSONAR-UI and tried to make a test from RoEduNet to
anyone I have found on the perfSONAR-UI list. I used for this pourpose a
username and a password created by someone from RoEduNet (Gidp account)
but when I try to make the test I get this error:

<quote>

2009-07-17T11:41:33 info OPPD.no_service.INFO% Service: MP/BWCTL
2009-07-17T11:41:34 info OPPD.no_service.INFO% Authentication:

2009-07-17T11:41:34 error OPPD.no_service.ERROR% No authentication
information in SOAP header!

2009-07-17T11:41:34 info OPPD.no_service.INFO% Received message
2009-07-17T11:41:34 debug OPPD.no_service.DEBUG% Raw Message:
<?xml version="1.0"?>
<nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/";
xmlns:bwctl="http://ggf.org/ns/nmwg/tools/bwctl/2.0/";
xmlns:iperf="http://ggf.org/ns/nmwg/tools/iperf/2.0/"; xmlns:nmtm=
"http://ggf.org/ns/nmwg/time/2.0/";
xmlns:nmwgt="http://ggf.org/ns/nmwg/topology/2.0/";
xmlns:result="http://ggf.org/ns/nmwg/result/2.0/"; id="bwctl-request"
type="ErrorResponse">

  <nmwg:metadata id="bwctl-metadata">
    <bwctl:subject id="bwctl-subject">
      <nmwgt:endPoint type="ipv4" value="131.188.81.12"/>
    </bwctl:subject>

    <nmwg:eventType>http://ggf.org/ns/nmwg/tools/bwctl/2.0/</nmwg:eventType>
    <bwctl:parameters id="bwctl-parameters">
    <nmwg:parameter xmlns:nmwg="nmwg" name="duration"
value="60"/><nmwg:parameter xmlns:nmwg="nmwg" name="login"
value="perfsonar-RoEduNet"/><nmwg:parameter xmlns:nmwg="nmwg" name
="password" value="__removed__"/></bwctl:parameters>
  </nmwg:metadata>

  <nmwg:metadata id="iperf-metadata">
    <iperf:subject id="iperf-subject" metadataIdRef="bwctl-metadata">
      <nmwgt:endPointPair>
        <nmwgt:src type="ipv4" value="81.180.250.176"/>
        <nmwgt:dst type="ipv4" value="152.66.116.81"/>
      </nmwgt:endPointPair>
    </iperf:subject>
    <iperf:parameters id="iperf-parameters">
    <nmwg:parameter xmlns:nmwg="nmwg" name="protocol"
value="TCP"/><nmwg:parameter xmlns:nmwg="nmwg" name="windowSize"
value="32768"/></iperf:parameters>
    <nmwg:eventType>http://ggf.org/ns/nmwg/tools/iperf/2.0/</nmwg:eventType>
  </nmwg:metadata>

  <!-- triggers to indicate head of chains -->
  <nmwg:data id="1" metadataIdRef="iperf-metadata"/>


<nmwg:metadata id="return_message"><result:subject
metadataIdRef="message"
id="subjreturn"/><nmwg:eventType>error.authn.no_sectoken</nmwg:eventType></nmwg:metadata><nmwg:data
meta
dataIdRef="return_message" id="data_return_message"><nmwg:datum>No
authentication information in SOAP
header!</nmwg:datum></nmwg:data></nmwg:message>

2009-07-17T11:41:34 info OPPD.no_service.INFO% Service: MP/BWCTL
</quote>

 Do you have any ideea what is wrong here ?

-- 
=====================================
Manuel SUBREDU
Network Engineer at AARNIEC/RoEduNet
tel: +40 (232) 201 007
fax: +40 (232) 201 200
e-mail: 

=================================

Attachment: signature.asc
Description: OpenPGP digital signature