Skip to Content.
Sympa Menu

perfsonar-dev - Re: New "Finding related MPs" document and conf call proposal

Subject: perfsonar development work

List archive

Re: New "Finding related MPs" document and conf call proposal


Chronological Thread 
  • From: Andreas Hanemann <>
  • To: Stephan Kraft <>
  • Cc: Nicolas Simar <>, Nina Jeliazkova <>, Martin Swany <>, WiN-Labor <>, "" <>
  • Subject: Re: New "Finding related MPs" document and conf call proposal
  • Date: Wed, 07 May 2008 14:52:50 +0200

Hi Stephan,

Based on your proposal the business logic in the visualisation could then look as follows.

- Traceroute output should be transformed to router locations (for my own convenience ignoring the proposal from Jeff at the moment).
- The router locations are checked against the LS whether there are HADES measurement locations (I am assuming that the registration of HADES MA to the LS then lists all the measurement locations).
- For all location pairs that are derived from the locations, the traceroute MP is asked for actual routes.
- Finally, the HADES MA is asked for actual measurement data for interesting location pairs.

I will work on the document to integrate this.

Best regards
Andreas


Stephan Kraft schrieb:
Hi Andreas,

i added some comments on the document (attached). Main point for HADES and BWCTL will be, that it is not foreseen to put the "business logic" for finding related MPs into the HADES MA or the BWCTL MP. The point is to find a way to correlate the traceroute information with the topology service (cNIS), together with the lookup service.

A proper way may be a "Traceroute MA" containing the information about traceroute of N=n(n-1) measurement paths (50 boxes representing 2450 measurements, _not_ containing additional measurements like IPv6, ToS etc.). This Traceroute MA can be requested by cNIS, LS etc.. Starting and ending point will be the measurement box (HADES, BWCTL other ...), the work will be to match the paths between the boxes and the paths between the corresponding routers. This should not be done by HADES MA (not only because it then just works for the HADES MA).

Best

Stephan



Andreas Hanemann schrieb:
Hi Nicolas, Nina, Martin, and Verena,

Based on the discussions that we had in Zagreb I have refined the document on "Finding related MPs". New is a proposal how an interface in perfsonarUI may look like and how its business logic should work (the most difficult part is the one related to the HADES MA and BWCTL MP). The business logic requires that several additional messages are exchanged. For this I have modified examples from other schema uses (similar as in the Tranformation Service document). As a starting point I would like you to read the document and participate at the conf call that I have proposed for next week. See the following link for the conf call and the document.

http://wiki.perfsonar.net/jra1-wiki/index.php/Finding_Related_MPs_Conf_Call_13_may_2008

Best regards
Andreas





--
Dr. Andreas Hanemann DFN-Verein
Stresemannstr. 78
10963 Berlin, Germany
Tel.: ++49 30 884299 64
Fax: ++49 30 884299 70
E-Mail: (Please do not use anymore)




Archive powered by MHonArc 2.6.16.

Top of Page