Skip to Content.
Sympa Menu

perfsonar-dev - Re: [pS-dev] One Way Delay requirements

Subject: perfsonar development work

List archive

Re: [pS-dev] One Way Delay requirements


Chronological Thread 
  • From: Nicolas Simar <>
  • To: Joe Metzger <>
  • Cc:
  • Subject: Re: [pS-dev] One Way Delay requirements
  • Date: Thu, 02 Aug 2007 17:20:02 +0100

What we are missing IMHO is the time scale at which those events occurs. Knowing the timescale would allow to select the most appropriate sending rate (and thus measurement methodology) as well as the accuracy on the measurement required.

Cheers,
Nicolas

Joe Metzger wrote:
Hi,
I had an action item from a recent conf call to send a list of the objectives for OWD tests.
Here is what I have at this point:

A. Detect & assist diagnosing common causes of performance degradation
1. non-congestion related packet Loss
2. congestion related packet loss and queuing
3. Routing problems
A. Changes
B. Asymmetry
C. Flapping
D. Other misc routing problems
B. Document actual uptime delivered.
C. Provide time references for when problems occurred and were fixed


The uptime delivered measurements should have greater than 1 minute resolution.


--Joe



--
Nicolas
______________________________________________________________________

Nicolas Simar
Network Engineer

DANTE - www.dante.net

Tel - BE: +32 (0) 4 366 93 49
Tel - UK: +44 (0)1223 371 300
Mobile: +44 (0) 7740 176 883

City House, 126-130 Hills Road
Cambridge CB2 1PQ
UK
_____________________________________________________________________






  • Re: [pS-dev] One Way Delay requirements, Nicolas Simar, 08/02/2007

Archive powered by MHonArc 2.6.16.

Top of Page