perfsonar development work

[Nicolas Simar <>]

Stijn Verstichel wrote:
> Hi Nicolas,
>
> These commands should be configured by the NREN's themselves. However, 
> it should not be that difficult to provide them as a default, but it not 
> being supported as such at the moment. If this feature is to be provided 
> in your opinion, please let us know, and we'll make work of this RFE.

This would definitely be a benefit. The less the NRENs have to do the 
better it is for the adoption of the service.
See in attachment for the translation between cisco and Juniper commands 
(the most important ones are the yellow ones).

Cheers,
Nicolas

> Cheers,
>
> Stijn
>
> Nicolas Simar wrote:
>
> > Hi Stijn,
> >
> > is there a way of ensuring that the "*" commands are configured by the 
> > NRENs? Should they be by default when they download the MP or do they 
> > have to configure those themselves?
> >
> > Cheers,
> > Nicolas
> >
> > Nicolas Simar wrote:
> >
> > > Hi,
> > >
> > > Chris has compiles a list of command that should be provided by the 
> > > networks in order to help the NOC and PERT in their daily work. The 
> > > command listed are cisco commands.
> > >
> > > If you are using juniper (or any other equipment), could you please 
> > > translate the following command (or even a subset of them) to Juniper 
> > > commands as they will most likely be required for the prototype.
> > >
> > > We are looking in particular at the ones preceeded by "*".
> > >
> > > Thank you very much in advance.
> > >
> > > Nicolas
> > >
> > > -------- Original Message --------
> > > Subject: Re: Looking glass command
> > > Date: Tue, 19 Dec 2006 16:53:23 +0100
> > > From: Chris Welti 
> > > <>
> > > To: Nicolas Simar 
> > > <>
> > > CC: Simon Leinen 
> > > <>
> > > References: <> 
> > > <> <>
> > >
> > > Hi Nicolas,
> > >
> > > I went over some available looking glasses (most items from GRNET) 
> > > and added some functionality from brainstorming with my NOC/PERT 
> > > colleagues.
> > > Note, we only use Cisco devices, so I don't know if similar commands 
> > > are available for other platforms...
> > >
> > > Useful CISCO commands for PERT/NOC debugging (in GN2 JRA1):
> > >
> > > General/IPv4:
> > > show environment
> > > *show interface <interface>
> > > *show interface description
> > > show ip access-lists
> > > *show ip bgp <ip address>
> > > show ip bgp summary
> > > show ip bgp dampening dampened-paths
> > > show ip bgp neighbor <ip address> advertised-routes
> > > show ip bgp neighbor <ip address> received-routes
> > > show ip bgp dampening flap-statistics
> > > show ip interface <interface>
> > > show ip mbgp <ip address>
> > > show ip mroute <ip address>
> > > show ip msdp sa-cache <as number>
> > > show ip msdp sum
> > > show ip msdp count
> > > show ip msdp peer <ip address>
> > > show ip ospf database external <ip address>
> > > show ip protocols
> > > *show ip route <ip address>
> > > show ip rpf
> > > show ip sdr
> > > show ip sdr detail
> > > show module
> > > *show running interface <interface>
> > > show version
> > > *ping <ip address>
> > > *trace <ip address>
> > > mtrace <ip address>
> > >
> > > IPv6:
> > > *show ipv6 route <ipv6 address>
> > > *show ipv6 interface <interface>
> > > show ipv6 access-list
> > > *show bgp ipv6 <IPv6 prefix network/length>
> > > show bgp ipv6 summary
> > > show bgp ipv6 flap-statistics
> > > *ping ipv6 <ipv6 address>
> > > *trace ipv6 <ipv6 address>
> > >
> > > MPLS:
> > > show mpls l2transport vc
> > > *show mpls l2transport vc detail
> > > show mpls forwarding-table <interface>
> > > show ip vrf
> > > show ip vrf detail
> > > *show ip route vrf <VPN name>
> > > *ping vrf <VPN name> <ip address>
> > > *trace vrf <VPN name> <ip address>
> > >
> > > (*) development priority; of course, all commands are important, but 
> > > those are the ones which I'd say MUST be there.
> > >
> > >
> > > Regards,
> > > Chris
> > >
> > >
> > > Nicolas Simar wrote:
> > >
> > > > Chris Welti wrote:
> > > >
> > > > > Hi Nicolas,
> > > > >
> > > > > Our offices are closed from this Saturday till January 4th, so i'll
> > > > > try to come up with some examples this week.
> > > > > If I understand correctly, this is for commands to use on a router 
> > > > > right?
> > > > > Like interface descriptions, stats (counters), configuration etc?
> > > >
> > > >
> > > >
> > > > Typically, at this stage, we are looking at show command like you can
> > > > find on typical looking glass e.g.
> > > > http://www.garr.it/mappagarr/garr-b-mapaltri-engl.shtml
> > > >
> > > > If you think that you'll need quite a few of them, could you please
> > > > prioritise them (either on an individual basis or per group).
> > > >
> > > > Thanks a lot.
> > > >
> > > > Cheers,
> > > > Nicolas
> > > >
> > > > PS: for clarification, by stats, I can see two type of things: show
> > > > command which shows counters values and the second one would be OID
> > > > access. The second one is not yet part of our portfolio, so you can
> > > > ignore it for the time being.
> > > >
> > > > > Regards,
> > > > > Chris
> > > > >
> > > > > Nicolas Simar wrote:
> > > > >
> > > > > > Hi Chris,
> > > > > >
> > > > > > could I ask you to send a list the looking glass command that 
> > > > > > would be
> > > > > > useful for the NOC and for the PERT when troubleshooting problems. 
> > > > > > This
> > > > > > would be a helpful start for the Pilot. Could you please send this 
> > > > > > list
> > > > > > if possible before the Cambridge meeting.
> > > > > >
> > > > > > Thanks a lot.
> > > > > >
> > > > > > Cheers,

--
Nicolas
______________________________________________________________________

Nicolas Simar
Network Engineer

DANTE - www.dante.net

Tel - BE: +32 (0) 4 366 93 49
Tel - UK: +44 (0)1223 371 300
Mobile: +44 (0) 7740 176 883

City House, 126-130 Hills Road
Cambridge CB2 1PQ
UK
_____________________________________________________________________

Attachment: NS-06-126 - Cisco and Juniper show commands.xls
Description: MS-Excel spreadsheet