perfsonar development work

["Vedrin Jeliazkov" <>]

Hi Kitzia,

A slight change in rrd database xml config file's syntax has been introduced
after perfSONAR-1.0's official release. The php script you've used to generate
the file implements the new syntax, while perfSONAR-1.0 RRD MA service
understands only the old one. If you've installed perfSONAR-1.0 RRD MA, than
I'm afraid you'll either have to modify the php script or edit the clara.xml
file manually by replacing all occurrences of the following 3 lines:

<nmwg:parameter name="supportedEventType">utilization</nmwg:parameter> 
</nmwg:parameters>

with the following single line:

<nmwg:eventType>utilization</nmwg:eventType>

When you're finished, you should restart the service and check again whether
it works with the modified xml config file.

Kind regards,
Vedrin

Kitzia Lumbreras Fuentes 
<>
 wrote:

> Hi Loukik,
> We've already generated the xml file with php script and replaced the 
> existing test file but it seems still doesn't work, I tried with 
> perfSONAR UI but I can't retrieve any info.
> I'm sending also the xml file.
> 
> Regards,
> Kitzia
> 
> Loukik Kudarimoti wrote:
> > Kitzia Lumbreras Fuentes wrote:
> >> Hi Loukik,
> >>
> >> We've already copy the rrd files to the machine, and we also 
> >> configured the xml file just with some minor changes.
> > umm..Minor changes only? Can you please mail me the xml file?
> >> What's next now?
> > Have you replaced the existing dummy/test xml file?
> >
> > Writing your own xml metadata configuration file as you have done 
> > above and replacing the existing test file with it is the last step in 
> > the process.
> >
> > Via perfSONAR UI, I am looking at the data available from your service 
> > for all your interfaces..I only see one and I think its the test one 
> > with a few details changed...
> >
> > Loukik.
> >>
> >> Best regards.
> >> Kitzia
> >>
> >>
> >> Loukik Kudarimoti wrote:
> >>> Kitzia,
> >>>
> >>> I guess you are collecting IP link utilisation data from your 
> >>> routers (using snmp) and storing them into RRD files? This is what I 
> >>> remember from my discussion with Hans. All these RRD files that are 
> >>> being updated regularly should be available on the machine where you 
> >>> have installed perfSONAR RRD MA. For GEANT2, these files are located 
> >>> on a different machine. So, we SCP all the files on a regular basis.
> >>>
> >>> A quick guide for writing up the xml file can be found on this webpage
> >>> http://wiki.perfsonar.net/jra1-wiki/index.php/RRD_description_file
> >>>
> >>> A recently written document explaining the metadata configuration 
> >>> file more in detail is in attachment. We are still working on this 
> >>> document so it might not be as user-friendly and intuitive as we 
> >>> want it to be.
> >>>
> >>> If you need more help, many of us are available on skype (my skype 
> >>> id: loukik_k).
> >>>
> >>> regards,
> >>> Loukik.
> >>>
> >>>
> >>> Kitzia Lumbreras Fuentes wrote:
> >>>> Hi Loukik,
> >>>> Just to be sure, which are the rrd files that we're supposed to have?
> >>>> And we may also need a quick guide for the xml file.
> >>>>
> >>>> Best regards,
> >>>>    Kitzia
> >>>>
> >>>> Loukik Kudarimoti wrote:
> >>>>> Hi Kitzia,
> >>>>>
> >>>>> The response looks fine. RRD MA has been installed successfully. 
> >>>>> The last few steps include:
> >>>>>
> >>>>> 1) make sure your rrd files are located on the same machine
> >>>>>
> >>>>> 2) check out the xml file in /conf/rrddatabase-test.xml (or 
> >>>>> something similar). Let us know if you don't understand the 
> >>>>> contents or the structure of this file. We can explain it to you.
> >>>>>
> >>>>> 3) Build your own xml config. file by following the above example.
> >>>>>
> >>>>> 4) Replace the xml config. file in point 2 above with your new 
> >>>>> file and let us know...if we can read your data
> >>>>>
> >>>>> can you please proceed with the above steps? Let us know if you 
> >>>>> need any help.
> >>>>>
> >>>>> Regards,
> >>>>> Loukik.
> >>>>>
> >>>>>
> >>>>> Kitzia Lumbreras Fuentes wrote:
> >>>>>> Hello Loukik,
> >>>>>> Here is the info you requested:
> >>>>>> The MAQueryResponse.xml and also the rest of the output from the 
> >>>>>> test
> >>>>>>
> >>>>>> <?xml version="1.0" encoding="UTF-8"?>
> >>>>>> <nmwg:message xmlns:nmwg="http://ggf.org/ns/nmwg/base/2.0/"; 
> >>>>>> id="localhost.localdomain.-53b5cb3c:10ee7c0e935:-7fdf">
> >>>>>>   <nmwg:metadata id="meta1">
> >>>>>>      <netutil:subject 
> >>>>>>
xmlns:netutil="http://ggf.org/ns/nmwg/characteristic/utilization/2.0/"; 
> >>>>>> id="subj1">
> >>>>>>         <nmwgt:interface 
> >>>>>> xmlns:nmwgt="http://ggf.org/ns/nmwg/topology/2.0/";>
> >>>>>>            <nmwgt:hostName>test-hostName</nmwgt:hostName>
> >>>>>>            <nmwgt:ifName>test-0</nmwgt:ifName>
> >>>>>>            <nmwgt:ifDescription>test 
> >>>>>> descripyion</nmwgt:ifDescription>
> >>>>>>            <nmwgt:ifAddress type="ipv4">10.1.2.3</nmwgt:ifAddress>
> >>>>>>            <nmwgt:direction>in</nmwgt:direction>
> >>>>>>            <nmwgt:authRealm>TestRealm</nmwgt:authRealm>
> >>>>>>            <nmwgt:capacity>1000BaseT</nmwgt:capacity>
> >>>>>>         </nmwgt:interface>
> >>>>>>      </netutil:subject>
> >>>>>>      <nmwg:eventType>utilization</nmwg:eventType>
> >>>>>>   </nmwg:metadata>
> >>>>>>   <nmwg:data 
> >>>>>> id="localhost.localdomain.-53b5cb3c:10ee7c0e935:-7fe0" 
> >>>>>> metadataIdRef="meta1">
> >>>>>>      <nmwg:datum timeValue="1121558400" 
> >>>>>> value="364.18786013323563" />
> >>>>>>      <nmwg:datum timeValue="1121644800" 
> >>>>>> value="189.25857952114652" />
> >>>>>>      <nmwg:datum timeValue="1121731200" value="157.6300922870065" />
> >>>>>>      <nmwg:datum timeValue="1121817600" value="341.2686134412051" />
> >>>>>>      <nmwg:datum timeValue="1121904000" 
> >>>>>> value="376.50555043698813" />
> >>>>>>   </nmwg:data>
> >>>>>> </nmwg:message>
> >>>>>>
> >>>>>> Query Test
> >>>>>> End point: 
> >>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>
> >>>>>> Request file: ../xml/MAQueryRequest.xml
> >>>>>> Response file: ../xml/MAQueryResponse.xml
> >>>>>> [#document: null]
> >>>>>> time taken :1.138 secs
> >>>>>> Client exiting
> >>>>>> Query Test (Key)
> >>>>>> End point: 
> >>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>
> >>>>>> Request file: ../xml/MAQueryKeyRequest.xml
> >>>>>> Response file: ../xml/MAQueryKeyResponse.xml
> >>>>>> [#document: null]
> >>>>>> time taken :0.194 secs
> >>>>>> Client exiting
> >>>>>> Store Test
> >>>>>> End point: 
> >>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>
> >>>>>> Request file: ../xml/MAStoreRequest.xml
> >>>>>> Response file: ../xml/MAStoreResponse.xml
> >>>>>> [#document: null]
> >>>>>> time taken :0.136 secs
> >>>>>> Client exiting
> >>>>>> Store Test (Key)
> >>>>>> End point: 
> >>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>
> >>>>>> Request file: ../xml/MAStoreKeyRequest.xml
> >>>>>> Response file: ../xml/MAStoreKeyResponse.xml
> >>>>>> [#document: null]
> >>>>>> time taken :0.129 secs
> >>>>>> Client exiting
> >>>>>>
> >>>>>> Best regards,
> >>>>>>    Kitzia
> >>>>>>
> >>>>>> Loukik Kudarimoti wrote:
> >>>>>>> Hi Kitzia,
> >>>>>>>
> >>>>>>> Can you please mail us the output present in the 
> >>>>>>> MAQueryResponse.xml?
> >>>>>>> (it looks like everything is ok..we only want to be sure)
> >>>>>>>
> >>>>>>> If we confirm that everything is ok, your next steps would be:
> >>>>>>>
> >>>>>>> 1) make sure your rrd files are located on the same machine
> >>>>>>>
> >>>>>>> 2) check out the xml file in /conf/rrddatabase-test.xml (or 
> >>>>>>> something similar). Let us know if you don't understand the 
> >>>>>>> contents or the structure of this file. We can explain it to you.
> >>>>>>>
> >>>>>>> 3) Build your own xml config. file by following the above example.
> >>>>>>>
> >>>>>>> 4) Replace the xml config. file in point 2 above with your new 
> >>>>>>> file and let us know...if we can read your data, we will be done!
> >>>>>>>
> >>>>>>> regards,
> >>>>>>> Loukik.
> >>>>>>>
> >>>>>>>
> >>>>>>> Kitzia Lumbreras Fuentes wrote:
> >>>>>>>> Hi Vedrin,
> >>>>>>>>
> >>>>>>>> The problem was indeed in /etc/ld.so.conf The output after 
> >>>>>>>> fixing :
> >>>>>>>> End point: 
> >>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>
> >>>>>>>> Request file: ../xml/MAQueryRequest.xml
> >>>>>>>> Response file: ../xml/MAQueryResponse.xml
> >>>>>>>> [#document: null]
> >>>>>>>> time taken :1.138 secs
> >>>>>>>> Client exiting
> >>>>>>>>
> >>>>>>>> The rest of the test it's similar as above.
> >>>>>>>>
> >>>>>>>> What would be the next step?
> >>>>>>>>
> >>>>>>>> Regards,
> >>>>>>>>    Kitzia
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Vedrin Jeliazkov wrote:
> >>>>>>>>> Hi Kitzia,
> >>>>>>>>>
> >>>>>>>>> It looks like either you haven't compiled rrdjtool or its 
> >>>>>>>>> directory is not
> >>>>>>>>> known to the linker (ld). You could fix this by making sure that:
> >>>>>>>>>
> >>>>>>>>> 1) the following files exist in 
> >>>>>>>>> $PERFSONAR/contrib/rrdjtool/build:
> >>>>>>>>>
> >>>>>>>>> -rwxr-xr-x  1 root root 10895 2006-09-25 23:43 libjrrd.so*
> >>>>>>>>> -rw-r--r--  1 root root 13501 2006-09-25 23:43 rrdjtool.jar
> >>>>>>>>>
> >>>>>>>>> 2) the path to libjrrd.so is known to ld (either through the 
> >>>>>>>>> environmental
> >>>>>>>>> variable LD_LIBRARY_PATH or via appropriate setting in 
> >>>>>>>>> /etc/ld.so.conf)
> >>>>>>>>>
> >>>>>>>>> Best regards,
> >>>>>>>>> Vedrin
> >>>>>>>>>
> >>>>>>>>> Kitzia Lumbreras Fuentes 
> >>>>>>>>> <>
> >>>>>>>>>  wrote:
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Hello,
> >>>>>>>>>> -->About the script, I ran the test-ma.sh and this is the output
> >>>>>>>>>> Query Test
> >>>>>>>>>> End point:
> >>>>>>>>>>     
> >>>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Request file: ../xml/MAQueryRequest.xml
> >>>>>>>>>> Response file: ../xml/MAQueryResponse.xml
> >>>>>>>>>> SOAPClient.makeRequest: General exception encountered by client
> >>>>>>>>>> AxisFault
> >>>>>>>>>>  faultCode: 
> >>>>>>>>>> {http://schemas.xmlsoap.org/soap/envelope/}Server.userException
> >>>>>>>>>>  faultSubcode:
> >>>>>>>>>>  faultString: 
> >>>>>>>>>> org.perfsonar.service.commons.exceptions.SystemException: 
> >>>>>>>>>> [unknown]: RRDStorageManager.rrdFetch: Cannot connect
> >>>>>>>>>>
> >>>>>>>>>> with rrdjtool native library: no jrrd in java.library.path
> >>>>>>>>>>  faultActor:
> >>>>>>>>>>  faultNode:
> >>>>>>>>>>  faultDetail:
> >>>>>>>>>>         {http://xml.apache.org/axis/}hostname:server2-saopaulo
> >>>>>>>>>>
> >>>>>>>>>> org.perfsonar.service.commons.exceptions.SystemException: 
> >>>>>>>>>> [unknown]: RRDStorageManager.rrdFetch: Cannot connect with 
> >>>>>>>>>> rrdjtool
> >>>>>>>>>>
> >>>>>>>>>> native library: no jrrd in java.library.path
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:222)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:129)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>>
> org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>>
> org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.xerces.parsers.XML11Configuration.parse(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.xerces.parsers.XML11Configuration.parse(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at org.apache.xerces.parsers.XMLParser.parse(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.xerces.parsers.AbstractSAXParser.parse(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at javax.xml.parsers.SAXParser.parse(SAXParser.java:375)
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.axis.encoding.DeserializationContext.parse(DeserializationContext.java:227)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.axis.SOAPPart.getAsSOAPEnvelope(SOAPPart.java:696)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.axis.Message.getSOAPEnvelope(Message.java:435)
> >>>>>>>>>>         at
> >>>>>>>>>>     
> >>>>>>>>>
>
org.apache.axis.handlers.soap.MustUnderstandChecker.invoke(MustUnderstandChecker.java:62)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.axis.client.AxisClient.invoke(AxisClient.java:206)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.apache.axis.client.Call.invokeEngine(Call.java:2784)
> >>>>>>>>>>         at org.apache.axis.client.Call.invoke(Call.java:2767)
> >>>>>>>>>>         at org.apache.axis.client.Call.invoke(Call.java:1792)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.perfsonar.client.testHarness.SOAPClient.makeRequest(Unknown 
> >>>>>>>>>> Source)
> >>>>>>>>>>         at 
> >>>>>>>>>> org.perfsonar.client.testHarness.SOAPClient.main(Unknown Source)
> >>>>>>>>>> Client exiting
> >>>>>>>>>> Query Test (Key)
> >>>>>>>>>> End point:
> >>>>>>>>>>     
> >>>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Request file: ../xml/MAQueryKeyRequest.xml
> >>>>>>>>>> Response file: ../xml/MAQueryKeyResponse.xml
> >>>>>>>>>> [#document: null]
> >>>>>>>>>> time taken :0.179 secs
> >>>>>>>>>> Client exiting
> >>>>>>>>>> Store Test
> >>>>>>>>>> End point:
> >>>>>>>>>>     
> >>>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Request file: ../xml/MAStoreRequest.xml
> >>>>>>>>>> Response file: ../xml/MAStoreResponse.xml
> >>>>>>>>>> [#document: null]
> >>>>>>>>>> time taken :0.123 secs
> >>>>>>>>>> Client exiting
> >>>>>>>>>> Store Test (Key)
> >>>>>>>>>> End point:
> >>>>>>>>>>     
> >>>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Request file: ../xml/MAStoreKeyRequest.xml
> >>>>>>>>>> Response file: ../xml/MAStoreKeyResponse.xml
> >>>>>>>>>> [#document: null]
> >>>>>>>>>> time taken :0.124 secs
> >>>>>>>>>> Client exiting
> >>>>>>>>>>
> >>>>>>>>>> -->And about the URL, it was wrong, my bad.
> >>>>>>>>>> The URL is
> >>>>>>>>>>     
> >>>>>>>>>
>
http://server2-saopaulo.lan.redclara.net:8085/axis/services/MeasurementArchiveService
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>> Kind regards,
> >>>>>>>>>>     Kitzia
> >>>>>>>>>>
> >>>>>>>>>> Loukik Kudarimoti wrote:
> >>>>>>>>>>  
> >>>>>>>>>>> Hello Kitzia,
> >>>>>>>>>>>
> >>>>>>>>>>> I am sorry about the delay in answering your email..
> >>>>>>>>>>>
> >>>>>>>>>>> I am not sure if you are using the right testing script. You 
> >>>>>>>>>>> need to test using the testing script for ma. The scripts 
> >>>>>>>>>>> are all located in the same directory but the one that you 
> >>>>>>>>>>> should is test-ma.sh. Please try it out and let me know the 
> >>>>>>>>>>> results?
> >>>>>>>>>>>
> >>>>>>>>>>> Also, while installing, did you notice any error messages?
> >>>>>>>>>>>
> >>>>>>>>>>> Also, the url that you sent to me cannot be resolved. Maybe 
> >>>>>>>>>>> there is a typing error? Can you re-send it?
> >>>>>>>>>>>
> >>>>>>>>>>> Loukik.
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>> Kitzia Lumbreras Fuentes wrote:
> >>>>>>>>>>>  
> >>>>>>>>>>>> Hello Loukik,
> >>>>>>>>>>>> Sorry by interrupting your holidays, but thanks for your help.
> >>>>>>>>>>>> About your questions:
> >>>>>>>>>>>> 1) RRD MA ---Yes, it's installed
> >>>>>>>>>>>>
> >>>>>>>>>>>> 2) About the scipts
> >>>>>>>>>>>> ---I used them, and I got something like this
> >>>>>>>>>>>> Request file: ../xml/LSDeregisterRequest.xml
> >>>>>>>>>>>> Response file: ../xml/LSDeregisterResponse.xml
> >>>>>>>>>>>> SOAPClient.makeRequest: General exception encountered by 
> >>>>>>>>>>>> client
> >>>>>>>>>>>> java.io.FileNotFoundException: 
> >>>>>>>>>>>> /home/noc/../xml/LSDeregisterRequest.xml (No such file or 
> >>>>>>>>>>>> directory)
> >>>>>>>>>>>>         at java.io.FileInputStream.open(Native Method)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> java.io.FileInputStream.<init>(FileInputStream.java:106)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> java.io.FileInputStream.<init>(FileInputStream.java:66)
> >>>>>>>>>>>>         at
> >>>>>>>>>>>>         
> >>>>>>>>>
>
sun.net.www.protocol.file.FileURLConnection.connect(FileURLConnection.java:70)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>>>         at
> >>>>>>>>>>>>         
> >>>>>>>>>
>
sun.net.www.protocol.file.FileURLConnection.getInputStream(FileURLConnection.java:161)
> 
> >>>>>>>>>
> >>>>>>>>>  
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>>
org.apache.xerces.impl.XMLEntityManager.setupCurrentEntity(Unknown
> 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>>
> org.apache.xerces.impl.XMLVersionDetector.determineDocVersion(Unknown 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.apache.xerces.parsers.XML11Configuration.parse(Unknown 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.apache.xerces.parsers.XML11Configuration.parse(Unknown 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.apache.xerces.parsers.XMLParser.parse(Unknown Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>>
javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:172)
> 
> >>>>>>>>>>>>
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.perfsonar.client.testHarness.SOAPClient.makeRequest(Unknown

> >>>>>>>>>>>> Source)
> >>>>>>>>>>>>         at 
> >>>>>>>>>>>> org.perfsonar.client.testHarness.SOAPClient.main(Unknown 
> >>>>>>>>>>>> Source)
> >>>>>>>>>>>> Client exiting
> >>>>>>>>>>>>
> >>>>>>>>>>>>         3) The URL
> >>>>>>>>>>>> 
> http://server2-saopaulo:8080/axis/services/MeasurementArchiveService 
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> Best regards,
> >>>>>>>>>>>>     Kitzia
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>> Loukik Kudarimoti wrote:
> >>>>>>>>>>>>
> >>>>>>>>>>>>  
> >>>>>>>>>>>>> Hello Kitzia,
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Great News! I have a list of questions to determine if 
> >>>>>>>>>>>>> your installation has gone ok. Can you please answer them?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> 1) Did you install RRD MA during perfsonar 1.0 installation?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> 2) There are scripts present in the installation package 
> >>>>>>>>>>>>> which will help you in testing your installation. Have you 
> >>>>>>>>>>>>> used them? If yes, were they successful?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> 3) What is the URL where your service is accessible? (for 
> >>>>>>>>>>>>> example, the URL for GEANT is 
> >>>>>>>>>>>>>
> http://mu.dante.org.uk:8090/axis/services/MeasurementArchiveService). 
> >>>>>>>>>>>>> Your service URL will only have a different host name and 
> >>>>>>>>>>>>> port number. Can you please provide me this URL?
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> I am currently on holidays and plan to be back in office 
> >>>>>>>>>>>>> next monday. I will try to answer your emails but maybe 
> >>>>>>>>>>>>> not very promptly ;)
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Thanks,
> >>>>>>>>>>>>> Loukik
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Kitzia Lumbreras Fuentes wrote:
> >>>>>>>>>>>>>   
> >>>>>>>>>>>>>> Hi Loukik,
> >>>>>>>>>>>>>> I'm Kitzia and I'm helping  Hans on the NOC. I've already 
> >>>>>>>>>>>>>> install perfSONAR and happyaxis validation page shows no 
> >>>>>>>>>>>>>> errors. Now, my question is what's the next step in order 
> >>>>>>>>>>>>>> to start with the peering??
> >>>>>>>>>>>>>>
> >>>>>>>>>>>>>> Regards
> >>>>>>>>>>>>>>     Kitzia
> >>>>>>>>>>>>>>             
> >>>>>>>>>>>>> -- 
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> ______________________________________________________________________ 
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Loukik Kudarimoti
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Network Engineer
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> DANTE - www.dante.net
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Tel: +44 (0)1223 371 300
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Fax: +44 (0)1223 371 371
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Email: 
> >>>>>>>>>>>>> 
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> City House, 126-130 Hills Road
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> Cambridge CB2 1PQ
> >>>>>>>>>>>>>
> >>>>>>>>>>>>> UK
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> _____________________________________________________________________ 
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>
> >>>>>>>>>>>>>           
> >>>>>>>>>>     
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>   
> >>>>>>>>
> >>>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>
> >>>>
> >>>
> >>
> >>
> >
> 
>