Skip to Content.
Sympa Menu

oess-users - [oess-users] Re: Incorrect flows on circuit

Subject: oess-users

List archive

[oess-users] Re: Incorrect flows on circuit


Chronological Thread 
  • From: Justin Ettore <>
  • To: "" <>
  • Subject: [oess-users] Re: Incorrect flows on circuit
  • Date: Fri, 27 Feb 2015 19:33:35 +0000
  • Accept-language: en-US

As a follow up now that the circuit is built I get these messages.

Feb 26 09:32:39 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:32:39] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:32:49 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:32:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:32:59 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:32:59] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:33:09 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:33:09] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:33:19 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:33:19] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:33:29 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:33:29] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:33:39 labvm01 /usr/share/oess-frontend/webservice/data.cgi: [2015/02/26 09:33:39] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Thanks
Justin Ettore
Network Engineering ā€“ ISC
University of Pennsylvania 

From: Microsoft Office User <>
Date: Friday, February 27, 2015 at 2:20 PM
To: "" <>
Subject: Incorrect flows on circuit

Iā€™m trying to deploy a very simple circuit and I cannot get the correct flows to build.  I have 2 MLXe brocades with an endpoint on each and 1 link between them.  Endpoing are e1/7 on both.  Link is e 1/4 on both.



This switch seems fine.  Hybrid endpoint unprotected vlan 20

SSH@hulk>sho open d

  datapath-id   Show the Datapath Identifier for the Switch

SSH@hulk>sho open datapath-id 

Openflow datapath id 002438ade7000000

SSH@hulk>sho open

  openflow                      Show openflow

SSH@hulk>sho openflow 

Administrative Status:       Enabled

SSL Status:                  Enabled


Controller Type:             OFV 100

Number of Controllers:       1


Controller 3:

Connection Mode:       active, TCP, 

Controller Address:     165.123.50.37

Connection Port:       6633

Connection Status:      OPENFLOW_ESTABLISHED



Match Capability: 

L2 : Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP

L3 : Port, Vlan, Vlan PCP, Ethertype(IP,ARP,LLDP), Source IP, Destination IP, IP Protocol, IP TOS, IP Src Port, IP Dst Port

L23: All


Normal Openflow Enabled Ports:      e1/3 e1/4 

Openflow Hybrid Interfaces:

e1/7

Protected VLANs   :     2,   10,   22,  105,  144,  146,  150,  151,  152,  300, 

                      310,  600,

Unprotected VLANs :    20,                                        




Default action: drop

Maximum number of flows allowed: 1024

Active flow: 4 


Maximum number of Protected Vlans allowed: 1024

Maximum number of Unprotected Vlans allowed: 1000

Total number of Unprotected Vlans: 1


This switch has the incorrect flows.  Hybrid endpoint unprotected vlan 30

SSH@flounder>sho open datapath-id 

Openflow datapath id cc4e244190000000

SSH@flounder>sho open

  openflow                      Show openflow

SSH@flounder>sho openflow 

Administrative Status:       Enabled

SSL Status:                  Enabled


Controller Type:             OFV 100

Number of Controllers:       1


Controller 2:

Connection Mode:       active, TCP, 

Controller Address:     165.123.50.37

Connection Port:       6633

Connection Status:      OPENFLOW_ESTABLISHED



Match Capability: 

L2 : Port, Source MAC, Destination MAC, Ether type, Vlan, Vlan PCP

L3 : Port, Vlan, Vlan PCP, Ethertype(IP,ARP,LLDP), Source IP, Destination IP, IP Protocol, IP TOS, IP Src Port, IP Dst Port

L23: All


Normal Openflow Enabled Ports:      e1/4 

Openflow Hybrid Interfaces:

e1/7

Protected VLANs   :     2,   10,   22,  146,  147,  200,  300,  800,

Unprotected VLANs :    30,

                                                                  



Default action: drop

Maximum number of flows allowed: 1024

Active flow: 2 


Maximum number of Protected Vlans allowed: 1024

Maximum number of Unprotected Vlans allowed: 1000

Total number of Unprotected Vlans: 1

SSH@flounder>


From OESS

OFFlowMod:
 DPID: 2438ade7000000
 Priority: 32768
 Match: VLAN: 20, IN PORT: 7
 Actions: SET VLAN ID: 450
          OUTPUT: 4

OFFlowMod:
 DPID: 2438ade7000000
 Priority: 32768
 Match: VLAN: 450, IN PORT: 4
 Actions: SET VLAN ID: 20
          OUTPUT: 7


OFFlowMod:
 DPID: cc4e244190000000
 Priority: 32768
 Match: VLAN: , IN PORT: 
 Actions: SET VLAN ID: 30
          OUTPUT: 7



Tail of messages

190000000 diff did not complete

Feb 26 09:05:34 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:05:34] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 14721744095928123392

Feb 26 09:05:34 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:05:34] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 10195418717618176

Feb 26 09:05:35 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:05:35] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 14721744095928123392

Feb 26 09:05:35 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:05:35] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 10195418717618176

Feb 26 09:05:35 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:35] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 288 OESS.FWDCTL.Switch.cc4e244190000000 - received a force_sync command

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 593 OESS.FWDCTL.Switch.cc4e244190000000 - sw:eng-lab-gw.flounder.net.isc.upenn.edu dpid:cc4e244190000000 diff sw rules to oe-ss rules

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 644 OESS.FWDCTL.Switch.cc4e244190000000 - Staring diffing process... total flows expected: 2

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 711 OESS.FWDCTL.Switch.cc4e244190000000 - sw:eng-lab-gw.flounder.net.isc.upenn.edu dpid:cc4e244190000000 diff plan 2 changes.  mods:0 adds:2 removals:0

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 564 OESS.FWDCTL.Switch.cc4e244190000000 - Installing Flow: OFFlowMod:#012 DPID: cc4e244190000000#012 Priority: 32768#012 Match: VLAN: -1, TYPE: 35020#012 Actions: OUTPUT: 65533

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 564 OESS.FWDCTL.Switch.cc4e244190000000 - Installing Flow: OFFlowMod:#012 DPID: cc4e244190000000#012 Priority: 32768#012 Match: VLAN: -1, TYPE: 34998#012 Actions: OUTPUT: 65533

Feb 26 09:05:42 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:05:42] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 732 OESS.FWDCTL.Switch.cc4e244190000000 - sw:eng-lab-gw.flounder.net.isc.upenn.edu dpid:cc4e244190000000 diff completed 2 changes

Feb 26 09:05:43 labvm01 nox: 00006|discovery:WARN new link detected (cc:4e:24:41:90:00:00:00 p:4 -> 00:24:38:ad:e7:00:00:00 p:4)

Feb 26 09:05:43 labvm01 OESS::DBus[18050]: add event

Feb 26 09:05:52 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:06:22 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:06:52 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:07:22 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:07:53 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:08:23 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:08:53 labvm01 OESS::DBus[18058]: Unable to find NODE DPID: 14721744095928123392

Feb 26 09:09:25 labvm01 /usr/bin/oess-fvd.pl[18101]: [2015/02/26 09:09:25] /usr/share/perl5/vendor_perl/OESS/FV.pm 435 OESS.FV - Link: Lab_Link forwarding up

Feb 26 09:09:25 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:25] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 1043 OESS.FWDCTL - FV has determined link Lab_Link is up

Feb 26 09:09:25 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:25] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 14721744095928123392

Feb 26 09:09:25 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:25] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 10195418717618176

Feb 26 09:09:25 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:25] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 1047 OESS.FWDCTL - FV Link Up completed

Feb 26 09:09:49 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 1062 OESS.FWDCTL - addVlan: 1

Feb 26 09:09:49 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:09:49 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:09:49 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 14721744095928123392

Feb 26 09:09:49 labvm01 /usr/bin/fwdctl.pl[18085]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Master.pm 329 OESS.FWDCTL - writing shared file for dpid: 10195418717618176

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18533]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 403 OESS.FWDCTL.Switch.2438ade7000000 - Installing Flow: OFFlowMod:#012 DPID: 2438ade7000000#012 Priority: 32768#012 Match: VLAN: 20, IN PORT: 7#012 Actions: SET VLAN ID: 450#012          OUTPUT: 4

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 234 OESS.FlowRule - Port IDs must be between 1 and 65535

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 648 OESS.FlowRule - Error no out_port specified in output action

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 403 OESS.FWDCTL.Switch.cc4e244190000000 - Installing Flow: 

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18533]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 403 OESS.FWDCTL.Switch.2438ade7000000 - Installing Flow: OFFlowMod:#012 DPID: 2438ade7000000#012 Priority: 32768#012 Match: VLAN: 450, IN PORT: 4#012 Actions: SET VLAN ID: 20#012          OUTPUT: 7

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18526]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FlowRule.pm 468 OESS.FlowRule - Error no out_port specified in output action

Feb 26 09:09:49 labvm01 AnyEvent::Fork of 18085[18533]: [2015/02/26 09:09:49] /usr/share/perl5/vendor_perl/OESS/FWDCTL/Switch.pm 429 OESS.FWDCTL.Switch.2438ade7000000 - Sending Barrier for node: 10195418717618176

[root@labvm01 ~]# 


Interfaces hulk

interface ethernet 1/4

 port-name link_to_flounder                                       

 openflow enable

 Enable


interface ethernet 1/7

 port-name wal-lab-sw2.dccs_Te2/1/1

 openflow protected-vlans 2 10 22 105 144 146 150 151 152 300 310 600 

 openflow enable layer2 hybrid-mode

 enable

!         



Interface flounder

interface ethernet 1/4

 port-name link_to_hulk_e1/4

 openflow enable

 Enable


!

interface ethernet 1/7

 port-name wal-lab-sw1.dccs_Te1/1/2

 openflow protected-vlans 2 10 22 146 147 200 300 800 

 openflow enable layer2 hybrid-mode

 enable






Thanks
Justin Ettore
Network Engineering ā€“ ISC
University of Pennsylvania 



Archive powered by MHonArc 2.6.16.

Top of Page