ndt-users list created

[Richard Carlson <>]

Nathalie;

This discussion should continue on the ndt-users list, instead of on the web100 discussion list.

There is a bug in the NDT 3.5.0 server.  The simplest thing is to update to the latest NDT package.  The other option is to manually fix this bug by

1) edit the src/testoption.c file

2) around line 734 you will see the text  /* wait(NULL); */  (this is a comment in 'C'

3) remove the "/*" and "*/" characters (so the wait() command is now active)

3) save the file, and rebuild/reinstall things.

This should resolve the 2nd problem.  I will need to dig into the 1st problem, when running from localhost.

Rich

On Oct 6, 2009, at 4:23 PM, Gholmieh, Nathalie wrote:

Hi-

 

 

 

I have searched the ndt-users discussion list, and none of the answers that I have read and tried seem to remove the error messages that I am getting when launching a NDT test. I probably am missing something. I am getting different error messages for different web100clts:

 

If I run a NDT test from the web100clt on the same host as the server I get the following output (server debug6 messages for this session are in localhosttest-* text file attached):

 

[root@Merlin ndt-3.5.6]# web100clt -n merlin.ucsd.edu -dddd

Testing network path for configuration and performance problems  --  Using IPv4 address

Requesting test suite:

 > Middlebox test

 > Simple firewall test

 > C2S throughput test

 > S2C throughput test

 > New Client, impliments queuing feedback

 <-- Middlebox test -->

  -- port: 3003

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  CWND limited speed = 259671.70 kbps

Done

 <-------------------->

 <-- Simple firewall test -->

checking for firewalls . . . . . . . . . . . . . . . . . . .

  -- port: 33225

  -- time: 1

  -- oport: 57729

Done

 <-------------------------->

 <-- C2S throughput test -->

  -- port: 3002

running 10s outbound test (client to server) . . . . .  10208.68 Mb/s

 <------------------------->

 <-- S2C throughput test -->

  -- port: 3003

running 10s inbound test (server to client) . . . . . . 3059.12 Mb/s

 <------------------------->

Server unable to determine bottleneck link type.

Alarm: Duplex Mismatch condition detected. Switch=Full and Host=Half

Information [S2C]: Packet queuing detected: 69.20% (local buffers)

Server 'merlin.ucsd.edu' is not behind a firewall. [Connection to the ephemeral port was successful]

Client is not behind a firewall. [Connection to the ephemeral port was successful]

Packet size is preserved End-to-End

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

[root@Merlin ndt-3.5.6]#

 

 

If the client is on a remote NDT host (version 3.5.0), I get the following error message (server debug6 messages for this session are in remotehosttest-* text file attached):

 

[ngholmieh@thunderbird apps]$ web100clt -n merlin.ucsd.edu -dddd

Testing network path for configuration and performance problems  --  Using IPv4 address

Requesting test suite:

 > Middlebox test

 > Simple firewall test

 > C2S throughput test

 > S2C throughput test

WARNING: NDT server has different version number (3.5.6)

 <-- Middlebox test -->

  -- port: 3003

Checking for Middleboxes . . . . . . . . . . . . . . . . . .  CWND limited speed = 47459.39 kbps

Done

 <-------------------->

 <-- Simple firewall test -->

checking for firewalls . . . . . . . . . . . . . . . . . . .

  -- port: 52941

  -- time: 1

  -- oport: 42867

Done

 <-------------------------->

 <-- C2S throughput test -->

  -- port: 3002

running 10s outbound test (client to server) . . . . .  938.75 Mb/s

 <------------------------->

 <-- S2C throughput test -->

  -- port: 3003

running 10s inbound test (server to client) . . . . . . 894.61 Mb/s

S2C throughput test: ERROR MSG: Server (S2C throughput test): Invalid S2C throughput received

S2C throughput test FAILED!

Server 'merlin.ucsd.edu' is not behind a firewall. [Connection to the ephemeral port was successful]

Client is not behind a firewall. [Connection to the ephemeral port was successful]

Information: Network Middlebox is modifying MSS variable (changed to 1444)

Server IP addresses are preserved End-to-End

Client IP addresses are preserved End-to-End

[ngholmieh@thunderbird apps]$

 

 

 

web100srv command that I used is:

web100srv --snaplog --tcpdump -a -dddddd -4

 

These are the software versions that I am using:

ndt-3.5.6

linux kernel-2.6.30 + web100-2.5.25-200906151113 & web100_userland-1.7

tcpdump-4.0.0

libpcap-1.0.0

 

Any ideas are well appreciated.

 

Thanks in advance!

 

 

Nathalie~

 

<localhosttest-web100srv-debug6.txt><remotehosttest-web100srv-debug6.txt>

_______________________________________________
Web100-discussion mailing list

https://lists.psc.edu/mailman/listinfo/web100-discussion

To UNSUBSCRIBE visit https://lists.psc.edu/mailman/unsubscribe/web100-discussion

Richard Carlson

1000 Oakbrook Dr

Ann Arbor, MI  48104

P: 734-352-7043

C: 630-251-4572