ndt-users list created

[Richard Carlson <>]

Hi ST;

I ran a test from my client with some debugging enabled and I'm seeing that 
the server is closing the connection (TCP FIN packet sent) instead of 
starting the test.  What version of the NDT code are you running?  Have the 
Web100 kernel patches been applied?  and are you running the new 
kernel?  The easiest way to determine this is to run the "ls /proc/web100" 
command.  If this comes back as "No such file or directory" then you are 
not running the Web100 patched kernel.  Look at the NDT install directions 
and/or the web100 installation directions for more details.

Rich
At 07:14 AM 10/6/2005, 

 wrote:
> Hello,
>
> Everything seems to be ok. But when I tried to click start I always get:
> 'Server Busy: Please wait 60 seconds for previous test to finish'
>
> I've tried to use web100clt client from the local host and this what I got:
> 'Testing network path for configuration and performance problems
> Information: The server 'localhost' does not support this command line client'
>
> I have no firewall running on machine at both ends. My host IP is 
> 64.28.31.66. please tell me if you need to access to my server, this is 
> still a test server.
>
> Thanks in advance,
>
> ST
>
>
> [root@localhost
>  ~]# ps auxw | grep fakewww
> root      2263  0.0  0.1   1548   328 ?        S    11:04   0:00 
> /usr/local/sbin/fakewww -l/var/log/fakewww.log
> root      3569  0.0  0.2   3764   680 pts/1    S+   13:19   0:00 grep fakewww
> [root@localhost
>  ~]# ps auxw | grep web100srv
> root      2255  0.0  0.2   2128   608 ?        S    11:04   0:00 
> /usr/local/sbin/web100srv -a
> root      3573  0.0  0.2   3764   584 pts/1    R+   13:19   0:00 grep 
> web100srv
>
>
> [root@localhost
>  ~]# netstat -nat | grep 7123
> tcp        0      0 
> 0.0.0.0:7123                0.0.0.0:*                   LISTEN
> [root@localhost
>  ~]# netstat -nat | grep 300
> tcp        0      0 
> 0.0.0.0:3001                0.0.0.0:*                   LISTEN
>
> [root@localhost
>  ~]# /sbin/chkconfig --list | grep ip
> iptables        0:off   1:off   2:on    3:on    4:on    5:on    6:off
> [root@localhost
>  ~]# /sbin/iptables -L
> Chain FORWARD (policy ACCEPT)
> target     prot opt source               destination
>
> Chain INPUT (policy ACCEPT)
> target     prot opt source               destination
>
> Chain OUTPUT (policy ACCEPT)

------------------------------------



Richard A. Carlson                              e-mail: 

Network Engineer                                phone:  (734) 352-7043
Internet2                                       fax:    (734) 913-4255
1000 Oakbrook Dr; Suite 300
Ann Arbor,  MI  48104