DYNES-Deployments

[Jason Bothe <>]

Ty

Can you try now?  I reset the switch and the optic seems to be up. 

Thanks

Jason

Sent from my iPhone

On Jul 15, 2013, at 14:19, Ty Bell 
<>
 wrote:

> Hi William,
> 
> Would it be possible to get Te0/0 on the Rice switch connected so we can 
> try some circuits to LEARN?
> 
> --Ty
> 
> On Jul 8, 2013, at 1:19 PM, William Deigaard 
> <>
>  wrote:
> 
>> Ty,
>> 
>> Yes, this is the correct list.  Couple of clarifications:
>> 
>>  1) the DYNES interface is fixed now using the "reboot without optic 
>> inserted workaround," so it should show up now).
>>  2) the UTHSC link is down and not connected at this point.  We may 
>> re-introduce that soon.
>>  3) The "Local Use 10G" link is not connected currently, but will be once 
>> circuit creating works for us.
>> 
>> So, please proceed at your leisure with upgrading.  Thanks.
>> 
>> 
>> 
>> 
>> -- 
>> William Deigaard  ^-^
>> ()
>>  (O O)
>> Go Owls!         ( v )
>> ------------------m-m--Director,
>> 713-348-5262 (o.)       Networking, Telecommunications & Data Centers
>> 713-487-7423 (gv)       Rice University
>> 
>> On Jul 5, 2013, at 12:58 PM, Ty Bell 
>> <>
>>  wrote:
>> 
>>> William,
>>> 
>>> Looking at the list of interfaces connected to the Rice S4810, it looks 
>>> like the only ones that are up and connected are to the FDT and IDC. I 
>>> wanted to check on this before upgrading the the switch since I'll need 
>>> to reload it a couple times. Am I clear to upgrade?
>>> 
>>> sw-rice>show interfaces description
>>> Interface                OK  Status     Protocol    Description
>>> TenGigabitEthernet 0/0   NO  up         down        'DYNES ION/WAN'
>>> TenGigabitEthernet 0/18  NO  up         down        '10GE interface 
>>> (local use)'
>>> TenGigabitEthernet 0/19  YES up         up          'fdt-rice 10GE eth0 
>>> interface'
>>> TenGigabitEthernet 0/20  YES up         up          'fdt-rice 1GE eth2 
>>> interface'
>>> TenGigabitEthernet 0/22  YES up         up          'fdt-rice 1GE eth3 
>>> interface'
>>> TenGigabitEthernet 0/24  YES up         up          'idc-rice 1GE 
>>> connection (eth1) for control-plane'
>>> TenGigabitEthernet 0/36  NO  up         down        'UTHSC 10GE link via 
>>> Travis St. Fiber'
>>> ManagementEthernet 0/0   YES up         up          Switch Management
>>> 
>>> --Ty
>>> 
>>> On Jul 3, 2013, at 3:56 PM, William Deigaard 
>>> <>
>>>  wrote:
>>> 
>>>> Brian,
>>>> 
>>>> Sounds good.  The console line is in place, and the switch password is 
>>>> still the default.
>>>> 
>>>> Thanks for the help.
>>>> 
>>>> 
>>>> -- 
>>>> William Deigaard  ^-^
>>>> ()
>>>>  (O O)
>>>> Go Owls!         ( v )
>>>> ------------------m-m--Director,
>>>> 713-348-5262 (o.)       Networking, Telecommunications & Data Centers
>>>> 713-487-7423 (gv)       Rice University
>>>> 
>>>> On Jul 3, 2013, at 1:22 PM, Brian Cashman 
>>>> <>
>>>>  wrote:
>>>> 
>>>>> William,
>>>>> 
>>>>> I think we can upgrade the firmware if we have console access. It
>>>>> appears that you have the switch console connected the IDC. I think that
>>>>> as long as we have the enable password for the switch, we're good. Ty
>>>>> can say for sure.
>>>>> 
>>>>> Brian
>>>>> 
>>>>> On 7/3/13 12:50 PM, William Deigaard wrote:
>>>>>> Brian,
>>>>>> 
>>>>>> The IP you listed is correct for the Rice IDC.  The vm running on it 
>>>>>> is at 168.7.170.200.
>>>>>> 
>>>>>> 
>>>>>> I continued to work on the issue after we sent the email below.  I 
>>>>>> believe most of that was caused by poor formulation of the src and dst 
>>>>>> sites in the OSCARS web interface.
>>>>>> 
>>>>>> When using the FDTAgent, I found that the most telling error was found 
>>>>>> in the /var/log/oscars/api.out file on the IDC VM:
>>>>>> 
>>>>>> ERROR ts=2013-07-02T10:43:38.794000Z 
>>>>>> event=OSCARSInternal-API.SubscribeManager05.getSubscription.end 
>>>>>> guid=dynes.rice.edu-V05-a15b14d6-4bae-42f2-9734-1456633934c1 
>>>>>> gri=dynes.rice.edu-319 errSeverity=MAJOR status=-1 msg="Problem 
>>>>>> writing SAAJ model to stream" 
>>>>>> url=https://learn-idc2.tx-learn.net:8443/axis2/services/OSCARSNotify 
>>>>>> 
>>>>>> 
>>>>>> I was planning on talking with the LEARN folks about the health and 
>>>>>> happiness of their IDC, but if we're planning on going to OESS sooner 
>>>>>> rather than later, I'll hold off on that.
>>>>>> 
>>>>>> 
>>>>>> And lastly, the Dell representative is willing to come to Rice to do 
>>>>>> the same firmware upgrade (to get to Openflow) that was already done 
>>>>>> at UofH.  Should we arrange for that for you, or do you want to do it?
>>>>>> 
>>>>>> Thanks.
> 
>