# A human-readable description of the overall mesh
description SANReN
# The overall mesh administrators (i.e. who one should contact if problems are
# seen with the mesh, etc).
name Roderick Mooi
email rmooi@csir.co.za
type perfsonarbuoy/owamp
read_url http://localhost:8085/perfSONAR_PS/services/pSB
write_url localhost:8569
type perfsonarbuoy/bwctl
read_url http://localhost:8085/perfSONAR_PS/services/pSB
write_url localhost:8570
address 155.232.40.42
description perfsonar6
address 155.232.40.50
description perfsonar7
type perfsonarbuoy/bwctl # Perform a bwctl test (i.e. achievable bandwidth)
tool bwctl/iperf # Use 'iperf' to do the bandwidh test
protocol tcp # Run a TCP bandwidth test
interval 3600 # Run the test every 10 minutes
duration 20 # Perform a 30 second test
# Define a test spec for doing jitter, loss and latency testing
type perfsonarbuoy/owamp # Perform a constant low-bandwidth OWAMP test
packet_interval 0.01 # Send 10 packets every second (i.e. pause 0.1 seconds between each packet)
loss_threshold 10 # Wait no more than 10 seconds for a response
session_count 18000 # Refresh the test every half hour (once every 18000 packets)
sample_count 300 # Send results back every 30 seconds (once every 300 packets)
packet_padding 0 # The size of the packets (not including the IP/UDP headers)
bucket_width 0.001 # The granularity of the measurements
type star
center_address 155.232.40.42
member 155.232.40.50
description Throughput Tests
group D1_throughput_hosts
test_spec bwctl_test